8VZZ000852L320 ABB H&B Contronic

8VZZ000852L320    ABB H&B Contronic    

The positioning module 07 GV 93 can also be used as a slave on the CS31 system bus. In the case, the positioning sets and sequences programmed in 07 GV 93 are controlled by a central unit 07 KR 91/07 KT 92/07 KT 93. This configuration allows the connection of additionnal positioning modules, slave central units as well as input and output modules.

The main features of the 07 GV 93 positioning module are :

● 1…3 axes

● Speed setpoint ±10 V DC

● Connection to incremental encoders

● High traversing speed of up to 100 m/min

● Position control cycle 4 ms

● Internal numerical representation 32 bits

● Adjustable ramps per axis for both traverse directions

● Encoder error detection

● Power supply 24 DC

● LEDs for displaying the input and output signals as wellas operating conditions and error messages

● Detachable screw-type terminal blocks

● Detachable plastic sheet on the front side of the device ;can be labelled with the signal names in order to have the inputs and outputs directly assigned

● Fastening by screws or by snapping the device onto aDIN rail

● RUN/STOP switch for starting and aborting the programexecution

● Diagnosis functions

3BSC950107R2

TK811V050 POF Cable, 5m, Duplex

3BSC950107R3

TK811V150 POF Cable, 15m, Duplex

3BSC950118R1

TK812V015 POF Cable, 1.5m, Simplex

3BSC950118R2

TK812V050 POF Cable, 5m, Simplex

3BSC950118R3

TK812V150 POF Cable, 15m, Simplex

3BSC950166R150

DSTK 222SL15 Cable Assembly ,Round/Ribbo

3BSC950251R1

TKX525V030 Cable, T-Box to DCN Interface

3BSC950342R1

TK852V010 Shielded FTP CAT 5e cross-over

3BSC970089R1

Extra, Front label set FCI

3BSC970091R1

Extra, Label set, item design. FCI

3BSE000506R801

Advant Fieldbus 100 User s Guide