2VAA008149R325 ABB H&B Contronic

2VAA008149R325    ABB H&B Contronic    

Note :

The internal 24 VDC (100 mA) power supply is only available for the 230 VAC/120 VAC versions. This power is used to power the inputs.

In case of the 24 VDC version, the 0 V of the second external power supply for the inputs has to be connected to the common "–".

The 0 V of the 24 VDC power supply for the outputs has to be connected to the common M-T -.

If the 24 VDC of the external supply is not connected to the common M-P +, the outputs are reset to 0.

– A free wheel diode is not necessary because theprotection is integrated into the transistor component.

– An external thermal fuse max. 5 A has to be connectedbetween the common + terminals and the 24 VDC to avoid damage in case of use of a lot of overload 

● Initialization

After configured and wired the unit :

– the unit initializes itself after power On.

– the error led goes out after initialization.

– the status of inputs/outputs is displayed on the 20 led's.

3BSE089151R0061

AE License, OPC Server for MOD 300 1.4

3BSE089151R0333

ABB Internal License OPC Server, MOD 300

3BSE089152R0052

Expand from 100 to 250 OPC Points

3BSE089152R0053

Expand from 250 to 500 OPC Points

3BSE089152R0054

Expand from 500 to 1,000 OPC Points

3BSE089152R0055

Expand from 1,000 to 2,500 OPC Points

3BSE089152R0056

Expand from 2,500 to 5,000 OPC Points

3BSE089152R0057

Expand from 5,000 to 10,000 OPC Points

3BSE089152R0058

Expand from 10,000 to 20,000 OPC Points

3BSE089152R0059

Expand from 20,000 to 30,000 OPC Points