8VZZ004865L0325 ABB H&B Contronic

8VZZ004865L0325    ABB H&B Contronic    

Note : Almost one common + and one commun – on each plug-in base ECZ have to be connected to the power supply.

When switching high current loads, use many commun + terminal to avoid damage to the base.

CAUTION : The common – is internaly connected to the earth terminal.

Note : In case of  use of an external power supply 24 VDC for inputs, the "24" VDC has to be connected to the common "+".

Caution : if the 24 VDC is connected to common "+", the remote unit can be supplied by the external power supply even if the main power supply is OFF.

● Initialization

After configured and wired the unit :

– the unit initializes itself after power On.

– the error led goes out after initialization.

– the status of 8 inputs is displayed on the 16 led's.

For the PC board 07 CM 90 and the coupler boards 07 CS 61 and 35 CS 91, refer to their own description

3BSE013237R1

TU836V1 Extended MTU, 250V, Fused

3BSE013238R1

TU837V1 Extended MTU, 250V, Fused

3BSE013250R1

DO821 Digital Output Relay 8 ch

3BSE013258R1

DO815 Digital Output 24V 8 ch

3BSE013281R1

TC514V2 AF 100 Twisted pair/opto modem

3BSE013284R1

TC515V2 AF100 Twisted pair to twisted

3BSE014162R1

DSAI 155A 14ch Thermo Couple module

3BSE014666R1

CI541V1 Profibus Interface Submodule

3BSE016034R1

Basic SW PROFIBUS-DP Licence

3BSE016258R1

Locking Device Cyl. RM500