MSR04X1 Wiring Accessories | Service and tools | ABB - ABB Group

To control up to 4 independent blind and roller shutter motors or ventilation flaps   (230 V AC). 

 – Automatic travel detection via identification of end positions for each output 

 – Direct operation of blind/shutter outputs via integrated binary inputs 

 – Mutually mechanically interlocked outputs 

 – Power supply via KNX bus voltage only Software functionality 

 – Support of KNX Data Secure 

 – Copy and change channels 

 – Templates for venetian blind and roller shutter outputs 

 – Time-delayed switching of motors for load balancing 

 – Sending and switching delay after bus voltage recovery 

 – Request status values via object 

 – Limit number of telegrams 

 – Preferred position on bus voltage failure-, recovery, download and reset 

 – Travel detection (automatically or triggered by object) or manual setting of   travel times 

 – Safety function (8 central safety objects, 2 safety objects and one 2-bit   forced operation per output, in total 8 safety functions can be flexible assigned to each output. All safety objects with cyclical monitoring.   Adjustable reaction on reset of safety function 

 – Direct commands Up/Down, Stop/Slat Adjustment

 – Move to position height/slat 0…255 (0…100%) 

 – Central direct commands for control of all channels at once 

 – Central automatic commands for control of all channels at once 

 – Central scene object for control of all channels at once 

 – Up to 4 positions can be predefined and approached 

 – 8-bit (1 Byte) scene; 16 assignments per output 

 – Control via 6-Byte Sector Control object 

 – Dead times of blind/shutter adjustable 

 – Tensioning function for e.g. awnings and step positioning for roller shutters 

 – Extension of travel times for zip-screens 

 – Limited travel range 

 – Change of direction for motor control   

 – Change on direction and delay times for motor adjustable 

 – Automatic sun protection (glare protection), position height/slat at sun or   predefined position and sun tracking 

 – Heating/cooling automatic with overheat protection   

 – Status messages: height/slat 0…255 (0…100%), upper/lower end position,   direct commands blocked, sun protection active, safety active, status combined (4 Byte),   status moving, detailed status sun protection (1 Byte) 

 – Controlling ventilation flaps, switch mode with automatic switch off function

ABB DSQC355A

ABB AI801

ABB AFC094AE02

ABB PPC380AE01

ABB 3HAC026271-001/DSQC646

ABB SNAT604IFS

ABB 086351-004

ABB TP830-1

ABB CP430T-ETH

ABB DSPU131 3BSE000355R1

ABB ICSI16E1