Safety instructions for AC500 PLCs 3ADR025003M9903

1 Safety instructions

cial environmental conditions must be observed (e.g., hazardous areas due to explosive sub stances, heavy soiling or corrosive influences). The devices must be handled and operated within the specified technical data and system data. The devices contain no serviceable parts and must not be opened. Removable covers must be closed during operation unless otherwise specified. Any liability for the consequences of incorrect use or unauthorized repairs is rejected.

Qualified per sonnel

Both the AC500 control system and other components in the vicinity are operated with dan gerous touch voltages. Touching live components can lead to serious health implications or even death. To avoid such risks and the occurrence of property damage, persons involved in the installation, commissioning and maintenance must have relevant knowledge about the following: 

 ● Automation technology 

 ● Handling of hazardous voltages 

 ● Application of relevant standards and regulations, accident prevention regulations and reg ulations on special environmental conditions (e.g., hazardous areas due to explosive sub stances, heavy soiling or corrosive influences)

Functional safety

The AC500-S safety user manual must be read and understood before using the safety configu ration and programming tools of Automation Builder/PS501 Control Builder Plus. Only qualified personnel are permitted to work with AC500-S safety PLCs. AC500-S safety user manual

General infor mation

The examples and diagrams in this manual are included solely for illustrative purposes. Because of the many variants and requirements associated with any particular installation, ABB cannot assume responsibility or liability for actual use based on the examples and diagrams. The PLC was developed according to the relevant standards. Any module-specific measures are described in the individual descriptions of the modules.

The product family AC500 control system is designed according to the EN 61131-2 and IEC 61131-2 standards. Any data that differs from IEC 61131-2, is due to the higher requirements of Maritime Services. Other differences are described in the technical data description of the devices

NOTICE! Avoidance of electrostatic charging PLC devices and equipment are sensitive to electrostatic discharge, which can cause internal damage and affect normal operation. Observe the following rules when handling the system:– Touch a grounded object to discharge potential static.– Wear an approved grounding wrist strap.– Do not touch connectors or pins on component boards.– Do not touch circuit components inside the equipment.– If available, use a static-safe workstation.– When not in use, store the equipment in appropriate static-safe packaging.

GRBTU

LDGRB-01

TB850

cRBX01 2VAA008424R1

PFTL101A 3BSE004166R1

PFTL101A 0.5KN 3BSE004160R1

1MRK002247-Apr04

BSD0750

AI04

129740-002

KOFA12D2

UNITROL 1020

EK150-40-11

A9-30-10

PE1315A

2GCA289005A0050

MR7557891MRS050640C

2RCA013655A0001H

TU810V1

TU841 3BSE020848R1

07CR41

WMDOLT2-A75(65KA)6E 1TGE106812P0001

Uras26 F-No. 3.346368.0 A-No 0240462201/2030

AO845A-eA

ICSF08D1  24V DC

PM556-TP-ETH

ICSF08D1 FPR3323101R1012 24VDC

07KT94-98

UFC911B108 3BHE037864R0108

AI830A

2RCA013892A0003H