ABB Compact Control Builder AC 800M 3BSE076940R1 PM862K01

This document contains information about one or more ABB products and may include a

description of or a reference to one or more standards that may be generally relevant to

the ABB products. The presence of any such description of a standard or reference to a

standard is not a representation that all of the ABB products referenced in this document

support all of the features of the described or referenced standard. In order to determine

the specific features supported by a particular ABB product, the reader should consult the

product specifications for the particular ABB product.

This Product Guide is intended for sales representatives to provide information on

Compact Control Builder AC 800M and OPC Server for AC 800M.

Engineering Environment

• Diagram Editor with Function Diagram - Diagram is a new graphical language

that graphically interconnects functions, function blocks, control modules and

embedded ST and SFC code blocks on the same page.

• Search and Navigation - Communication variable references from other

projects within the same system do now appear as references, if the projects are

downloaded.

• Task Analysis Tool - The task analysis tool in Control Builder has been made

more easy to use. The meaning of the different messages is now more precise.

Time stamps have been added to the warning and error messages in the

summery view of the Task Analysis tool, this makes it easier to relate between

the messages and the graph.

• Display of Unit Specific System Alarm and Event Generation - There is a new

menu entry in Control Builder on hardware types called Unit Specific System

Alarm and Events. It brings up a new user interface that shows what system

alarms and events a unit can generate. The information is shown in Control

Builder rather than being printed in a user manual.

• Heap Utilization Dialog Available in Online Mode - The controller heap

utilization dialog in Control Builder is now available also in online mode.

• Additional Caution Dialog at Download with Init Restart - An additional

caution dialog is shown before download of changes in case the user or the

system suggested an init restart (i.e. loss of all cold retained values).

• Compiler Warning in case Data Type used for IAC has been changed

If the user changes a structured data type used for communication variables,

then the receiving controller will get ISP until both server and client have been

downloaded to. With this new version, the user gets to know in advance in case

a download of changes includes changed data types that will cause ISP on any

communication variable.

Control and I/O

• CI873 EtherNet/IP

The CI873 EtherNet/IP has been improved. It now supports master redundancy

by using two CI873s. The redundancy does not require the slaves to have the

EtherNet/IP redundancy connection method implemented. There is now also

support for native EtherNet/IP devices. CI873 supports logical segment Class 1

connection for reading and writing data to EtherNet/IP devices, and it

originates Class1 for tag reading and Class 3 for tag writing to Allen Bradley

Logix 5000 series PLCs.

• CI868 Enhancements

– IEC 61850 Wizard Tool improvements

– IEC 61850 MMS Client functionality for CI868 Module

• Self-defined UDP and TCP Communication

The new UDPCommLib and TCPCommLib contains function block types that

are used for self-defined UDP and TCP communication. These function blocks

are used when the controller needs to communicate with external equipment.

The used protocol is UDP and TCP, running on Ethernet. The function is

similar to the already existing self-defined serial communication, but on

Ethernet. It uses the inbuilt CN1 and CN2 on the PM8xx CPU. Redundancy is

handled by RNRP.

• Support for DI818, DO818, DI828, DO828

This version supports four new S800 I/O modules on modulebus and

PROFIBUS via CI801/CI840.

– DI818 - 32 channel digital input for 24VDC

– DO818 - 32 channel digital output for 24VDC

– DI828 - 16 channel digital input for High Voltage AC/DC

– DO828 -16 channel relay output for High Voltage AC/DC

• More memory with PM851A, PM856A, PM860A - These renewed CPUs have

with this version more available memory:

– PM851A - Now 12 Mbyte total RAM

– PM856A and PM860A - Now 16 Mbyte total RAM

• Backup Media in PM891- Memory cards larger than 2GB can now be used in

PM891, by the introduction of support for SDHC and SDXC cards formatted as

FAT32.

• Enhanced Integration of ABB Devices - This version brings new ways of

integrating ABB Drives and Motor Starters into AC 800M.

– Support for ABB standard drive ACS880 with FENA-11 and PROFINE

The new hardware library - ABBDrvFenaCI871HwLib - provides

PROFINET connectivity to the ACS880 drive via the communication

adapter FENA-11.

– Support for ABB standard drives with FPBA-01 and PROFIBUS

The new hardware library - ABBDrvFpbaCI854HwLib - provides

PROFIBUS connectivity to ABB drives via the communication adapter

FPBA-01.

– New motor starters for MNS iS on PROFINET

The MNS iS hardware library - ABBMNSiSCI871HwLib - offers support

for the two new motor starter types - Sace Circuit Breakers (Sace CBR)

and DC Feeder (DC MFeed).

• Improved Analog Control

– External Reset Feedback - The PidCC and PidAdvancedCC control