ADLINK CM-435 Extreme Rugged™ PC/104 Single Board Computer

Extreme Rugged™ PC/104 Single Board Computer

with low power Vortex86SX/86DX System-on-Chip

Specifications

Core System

CPU 300MHz Vortex86SX or 800MHz Vortex86DX

Cache 16kB I-cache, 16kB D-cache

Memory 256MB soldered DDR2

System Controllers PC-compatible DMA and interrupt controller and timers

Real Time Clock Battery-backed RTC/CMOS

Powerfail Reset Triggers when key voltage drops below predetermined

thresholds

BIOS AMI BIOS

BUS ISA

I/O Interfaces

PATA DMA 100 IDE interface supports up to two hard drives

Storage  CompactFlash socket

Serial  2x RS-232. 2x RS-232/422/485

USB 2x USB 2.0 ports

KB/MS PS/2 interface

GPIO Eight general-purpose digital I/O pins

Ethernet

Ethernet  1x integrated Vortex86 10/100 port and 1x Intel® 82541PI

Gigabit Ethernet

Video

Graphics Engine  Integrated 2D, 64-bit, single-cycle, 100MHz

Resolution 1600 x 768

Video Memory 32/64MB DDR2

VGA  Yes

TTL/TFT Dual Channel 12-bit or Single Channel 18-bit color depth

Supports 3.3V, 5V flat panels

Power

Power Requirement 1.3A @5V

Mechanical and Environmental

Form Factor PC/104

Size 90 x 96 mm (3.6 x 3.8”)

Board Thickness 2.36 mm (0.093”)

Operating Temperature  (100 LFM system air flow)

• Standard: -20°C to +70°C

• Extreme Rugged™: -40°C to +85°C

Storage Temperature -55°C to +85°C

Operating Systems

Extended Support (BSP) Win XPe, WinCE 5.0/6.0. QNX 6.3/6.4/6.5. Linux

Ordering Information

Extreme Rugged™ PC/104 Single Board Computer

with low power Vortex86SX/86DX System-on-Chip

CM-435

Features

Extreme Rugged™ operating temperature: -40°C to +85°C

10/100 Ethernet, Gigabit Ethernet, 3D Video

4x Serial, 2x USB, 8x GPIOs

Ultra Low Power

486 migration

Modules

Model Number Description/Configuration

CM-435-R-10 CoreModule® 435. 300MHz Vortex CPU, 256MB RAM,

Video, 10/100 & Gigabit Ethernet

CM-435-R-12 CoreModule® 435. 800MHz Vortex CPU, 256MB RAM,

Video, 10/100 & Gigabit Ethernet

Accessories

Model Number Description/Configuration

CM-435-L-10 300MHz QuickStart Kit (CM-435-R-10 SBC, cable kit,

software, documentation)

CM-435-L-12 800MHz QuickStart Kit (CM-435-R-12 SBC, cable kit,

software, documentation)

Recommended Configurations

Model Number Description/Configuration

CM-435-R-10 (ETT) CM-435-R-10. -40°C to +85°C (optional)

CM-435-R-12 (ETT) CM-435-R-12. -40°C to +85°C (optional)