AO810 AO810V2 - ABB Ability™ System 800xA® hardware

The AO810/AO810V2 Analog Output Module has 8 unipolar analog output channels. To supervise the communication to the D/A-converters the serial data is read back and verified. The opencircuit diagnostic is received during the readback. The module performs self-diagnostic cyclically. The module diagnostics includes process power supply supervision, which is reported when supply voltage to output circuitry is to low. The error is reported as a channel error. The channel diagnostic includes fault detection of the channel (only reported on active channels). The error is reported if the output current is less than the output set value and the output set value is greater than 1 mA.

Features and benefits

8 channels of 0...20 mA, 4...20 mA outputs

OSP sets outputs to predetermined state upon error detection

Analog Output is to be short circuit secured to ZP or +24 V

ABB SC560

ABB SPASI23

ABB SPBRC400

ABB CI546 3BSE012545R1

ABB 3HAB8101-18/09A

ABB 3BHL000986P7001

ABB HBFFAEAGNBA1BAA11G

ABB TU810

ABB 5SHX1960L0006 3BHB016120R0002 3BHE019719R0101 GVC736BE101

ABB NBIO-31 3BSE011337R1

ABB SPAJ140

ABB A30-30-10RT

ABB T3N225

ABB 7625013-S

ABB XUD194 3BHE018137R0001 AC800PEC

ABB 129740-002  134177-001

ABB GFD233A103 3BH022294R0103

ABB AO810

ABB MVR 0.44-10KA