Yokogawa ATK4A-00 S1 16-channel KS cable interface adapter

Yokogawa ATK4A-00 S1 16-channel KS cable interface adapter

 GENERAL These Bus Converters connect CENTUM VP Human Interface Stations (HISes) on the Vnet/IP to CENTUM VP/CENTUM CS 3000/CENTUM CS stations on the V net, CENTUM CS 1000 stations on the VL net in other domain. To connect to CENTUM CS 3000/CENTUM CS System, LHS4450 Multiple Project Connection Package and LHS5450 Multiple Project Connection Builder are required. To connect to CENTUM CS 1000 System, an Ethernet, as well as these packages, is also required.  HARDWARE SPECIFICATIONS For the installation specifications and environmental conditions that are common to the systems, refer to “Integrated Production Control System CENTUM VP System Overview (Vnet/IP Edition) (GS 33K01A10- 50E).” Communication on the Vnet/IP Side Communication Speed: 100 Mbps, Full Duplex Connection: UTP cable (CAT5e or better), RJ45 connector Interface: 100Base-TX compliance Max. distance: 100 m (Distance between AVR10D and Layer 2 switch) Communication on the V net Side Communication Speed: 10 Mbps Connection: Coaxial cable, BNC type Dual-redundant or single For CENTUM VP, CENTUM CS 3000 and CENTUM CS Communication on the VL net Side Communication Speed: 10 Mbps Connection: Coaxial cable, BNC type Dual-redundant or single For CENTUM CS 1000 Configuration Nest Mounting 19-inch Rack Mounting: Rack mount (4 x M5 screws) Insulation bush (accessory) Connection Power Supply: M4 screw terminal connection Grounding: M4 screw terminal connection Contact Output: M4 screw terminal connection V net and VL net Side: T-junction BNC connection Vnet/IP Side: UTP cable (CAT5e or better) Power Supply (Specify with Suffix Code) Voltage: 100-120 V AC, Frequency: 50/60 Hz Voltage: 220-240 V AC, Frequency: 50/60 Hz Voltage: 24 V DC Power Consumption 100-120 V AC: 80 VA 220-240 V AC: 110 VA 24 V DC: 1.7 A Power supply method dual-line or single power line Weight Approx. 5.8 kg Regulatory Compliance For the detailed information of following standards, see "System Overview (Vnet/IP Edition) (GS 33K01A10- 50E)." Safety Standards [CSA] (for 100-120 V AC power supply) [CE Marking] (for 100-120 V AC, 220-240 V AC and 24 V DC power supply) EMC Conformity Standards [CE Marking] (for 100-120 V AC, 220-240 V AC and 24 V DC power supply) [C-Tick Marking] (for 220-240 V AC and 24 V DC power supply) [KC Marking] (for 100-120 V AC, 220-240 V AC and 24 V DC power supply)