HIMA Assembly kit B 5233-1/-2 H51q-HS / B 5233-1 and H51q-HRS / B 5233-2

Сборный комплект HIMA B 5233-1/-2 H51q-HS / B 5233-1 и H51q-HRS / B 5233-2

 Assembly kit B 5233-1/-2

 System H51q-HS / B 5233-1, 

System H51q-HRS / B 5233-2, 

PES high available, TÜV-tested, 

requirement class 1 ... 6

Parts of the assembly kit B 5233-1/-2:

 ZB2/CU2

 F8621A

 F8621A

 F8621A

 • 1 x K 1412A central rack, 5 units high, 19 inch, with integrated 

cable tray, with a hinged receptable for the label. 

• additional modules on the rear

 3 x Z 6011 decoupling and fusing to feed the power supply 

modules

 1 x Z 6012 fan module with fan run monitoring and fuse 

monitoring

 2 x Z 6013 decoupling and fusing of the supply voltage for the 

WD signal 

includes the modules:

 • 3 x F 7126 power supply module 24 V / 5 V, each 10 A (PS1 - PS3). 

The 5 V outputs of the power supply outputs are switched in paral

lel.

 • 1 x F 7131 power supply monitoring

 • 2 x F 8650 central module (CU1, CU2)

 • 2 x F 7546 bus termination module (B 5233-1)

 • 4 x F 7546 bus termination module (B 5233-2)

 • 1 x BV 7032 data connecting cable (only B 5233-1)

 modules for option (separate order)

 • 6 x F 8621A Coprocessor module (CM11 - CM13, CM21 - CM23)

 • 10 x F 8625 Ethernet-communication module

 • 10 x F 8626 Profibus-DP-communication module

 Assembly kits to be used for the I/O level:

 • B 9302 I/O-rack 4 units high, 19 inch

 • B 9361 additional power supply, 5 V DC, 5 units high, 19 inch

 The max. current must be 18 A, if 3 x F 7126 are used to keep the system

 in operation even one power supply module F 7126 has failed. The total

 required current of the control is the summary of the consumption of the

 modules in the central rack and of the I/O modules. For the values of the

 current requirement (+5 V DC) refer to the data sheets.