DS200ADGIG1AAA Auxiliary Genius Interface Board

Part Number : DS200ADGIG1AAA

SKU : DS200ADGIG1AAAGBTC

Manufacturer : GE Boards & Turbine Control

Series: Mark V DS200

Ge's ds 200 ad gig 1 aa board assembly is a part of the company's Mark V turbine control system series Speedtronic system, as mentioned above. This ds 200 ad gig 1 aa printed circuit board (PCB for short) is actually not the Mark V series auxiliary Genius interface board specially manufactured for Mark V series. This will be three important A-level product revisions of DS200ADGIG1 mother printed circuit board without this general electric product. Mark V series to which this special ds 200 ad gig 1 aa board belongs is generally out of date, because general electric company stopped its production in one of many years after its original mark series was launched. The greater Mark V series of ds 200 ad gig 1 aa equipment is generally out of date, but it has a continuous demand in the larger automation industry market, because it is one of the latest products in the GE Mark product series, and integrates the patented technology of Speedtronic control system into its various product series. The technology of Speedtronic control system in ds 200 ad gig 1 aa board and its larger Mark V series was first released in the middle and late 1960s together with the main concepts of Mark I series.

Hardware tips and specifications

This ds 200 ad gig 1 aa auxiliary Genius interface board consists of a set of specific hardware component contents and component specifications. Fortunately, we can find these contents in the Mark V series raw data manual on the Internet. Every corner of ds 200 ad gig 1 aa motherboard is factory drilled. Ds 200 ad gig 1 aa device is designed with a carrier board and an accessory daughter board, marked with GE logo and wiring code. Although the edge of the circuit board is made of traditional PCB layer, most of the circuit board is covered with black topcoat, which is a typical feature of Mark V series products. There are almost no mounting components in this part of the circuit board. At the top third of ds 200 ad gig 1 aa printed circuit board, the coating disappears, and there are several right-angle and vertical pin connectors, integrated circuits, resistors and test points on the circuit board. The board also has many jumper pins, allowing users to change the circuit to meet their specific needs. The board has four brackets connecting the daughter board and the main board.

Mark V daughter board for DS200ADGIG1AAA PCB has built-in additional integrated circuits. If you need more information about each chip, these ICs are usually marked with the original manufacturing number on the top surface. The board is about 8 inches by 6 inches, which is convenient because it is usually installed in the drive cabinet of Mark V series. The device will be screwed using factory-made holes along the edge of the plate. This ds 200 ad gig 1 aa auxiliary Genius interface board is regarded as an electrostatic sensitive GE PCB, so the attached grounding strap must be used when unpacking this Mark V series product. Ge has made three major modifications to ds 200 ad gig 1 aa, which may increase the overall size and performance specifications of the device.

General electric company provides some general considerations about standardizing the use of ds 200 ad gig 1 aa auxiliary Genius interface board. As mentioned in GE's original instruction manual, DS200ADGIG1AAA PCB is not designed to download EEPROM data of Mark V-series driver, because it must be downloaded using Mark V-series RS-232 port or keyboard.