DS200ADMAH1 modular daughter board

DS200ADMAH1 modular daughter board (also called ADMA board) is an analog-to-digital conversion module designed by General Electric (GE) for Mark V series turbine control system. This daughter board is mainly used to convert analog signals into digital signals, and works with DSPC control board and other interface boards to realize accurate control of drivers and exciters.

Product model and series

DS200ADMAH1 is an optional or alternative module of Mark V series, which is used in the control and management system of wind, steam and gas turbines. Its specific model is DS200ADMAH1A or DS200ADMAH1AAC, both of which belong to Mark V series.

Functions and characteristics

Analog-to-digital conversion: The main function of this module is to receive analog input signals from the circuit board and convert them into digital signals for further processing.

Interface and expansibility: DS200ADMAH1 supports up to 12 additional analog input channels, and interfaces with DSPC processor bus through built-in programmable logic device (PLD).

Signal processing capability: The module can filter, buffer and isolate the input signal to ensure the accuracy and reliability of the signal.

Status indicator: equipped with two LED indicators, a green IMOK light indicates normal operation and a red FAIL light indicates failure.

Installation compatibility: The module can be installed on the existing DPSC (Digital Power Control Board) without additional hardware changes.

Application scenario

DS200ADMAH1 is widely used in GE Mark V series turbine control system, including the management and control of wind, steam and gas turbines. It can cooperate with DSPC board and other interface boards (such as DS200SNPAH1A) to form a complete control system.

technical specifications

Analog input channels: Up to 16 analog inputs are supported.

Digital output points: 8 digital output points are provided.

Physical characteristics: the weight is 4 ounces, which conforms to international standards such as UL, CE and CSA.

Other relevant information

DS200ADMAH1A and DS 200 ADMAH 1A AAC are different versions of the same module, among which DS 200 ADMAH 1A AAC may have more advanced functions or improvements.

Specific parameter settings should be followed during installation to ensure that all I/O functions can operate normally.

DS200ADMAH1 modular daughter board is a high-performance analog-to-digital conversion module, which is suitable for signal processing and conversion tasks in industrial control systems. Its flexible design and powerful functions make it an important part of Mark V series turbine control system.