GE General Electric DS200CSSAG1 Cell State Sensor Board

GE DS200CSSAG1 battery state sensor board is a key component in Mark V series industrial system, which is used to monitor the health state of batteries, including voltage, current and temperature. This sensor board is widely used in power system and industrial automation field, with high precision and reliability.

Product overview

GE DS200CSSAG1 battery state sensor board is a part of Mark V series, which is used to monitor the state of battery pack and ensure the stable operation of the system. It is connected to the driver through a ribbon cable and communicates with external devices through a 40-pin connector.

technical specifications

Size: 4 inches high and 11 inches wide.

Connector: includes two 40-pin connectors, a 4-pin connector and a 9-pin connector.

Function: Monitor the voltage, current and temperature of the battery and transmit the data to the control system (such as PLC or SCADA system).

Installation and use

Power off before installation to avoid the risk of electric shock.

During installation, it should be avoided to pull the ribbon cable forcibly to avoid signal loss or damage to the sensor board.

The sensor board is usually installed in a protective bag to prevent static electricity accumulation. It is recommended to put it in the drive before installation.

Application scenario

GE DS200CSSAG1 battery status sensor board is suitable for power system, industrial automation and remote monitoring system. Its high-precision sensor and advanced communication technology ensure the reliability and stability of the equipment.

Comparison of other models

Other models related to DS200CSSAG1 include DS 200CSSA1A, DS200CSSAG1AAA, DS 200CSSA1B and DS200CSSAG1BBA, etc. These models may be different in some details, such as component layout or function.

matters need attention

Make sure that the drive is powered off before installation.

Need an assistant to assist in the installation to ensure safety.

If the old board is replaced, please pay attention to the possible differences between the old board and the new board.

To sum up, the GE DS200CSSAG1 battery status sensor board is a high-performance industrial-grade product, which is suitable for scenes that need to accurately monitor the battery status. Its design pays attention to reliability and ease of use, and it is an important part of Mark V series.

DS200CSSAG1A Cell State Sensor Board 

DS200CSSAG1AAA Cell State Sensor Assembly 

DS200CSSAG1BBA Cell State Sensor Board 

DS200CSSAG1B Cell State Sensor Board

DS200CSSAG1BCA Cell State Sensor Board

DS200CSSAG1BCB Cell State Sensor Board