DS200DMCBG1ABB DOS DUP Processor Board

Specification of technical parameters of DS200DMCBG1ABB

Product name: ds 200 dmcbg1 abb dos dup processor board

Manufacturer: General Electric

Series: Mark V turbine control system

Function description: DOS DUP Processor Board(DUP processor board)

Function code: DMCB

PCB type: PC Board/Add-On Board

Weight: 1.36 lbs (about 0.62 kg)

Coating process: ordinary coating

Hardware specifications and components:

Connectors: 3 26-pin connectors, 1 40-pin connector and 19 jumpers.

LED indicator: 2 LEDs, used for diagnostic test and fault identification.

Other connectors: 1 8-pin connector 1 3-pin connector 1 2-pin connector fuse:

The board contains two fuses for overvoltage protection. When a sudden power surge occurs, the fuse will blow to protect the circuit.

Special notes:

When disconnecting the cable, always hold the connector part of the cable to avoid damaging the cable by exerting pressure on the connector. For ribbon cables, special care should be taken because there are many thin wires inside.

Description of hardware features and functions:

Function orientation: DS200DMCBG1ABB is a part of Mark V turbine control system, which is mainly used for turbine control and management. It inherits the technical style of Speedtronic and has the core functions of DOS DUP processor board.

Hardware upgrade and revision: This product is a legacy product of Mark V series. Its design is based on the original DS200DMCBG1 printed circuit board, but three important product revision functions are added.

Installation and maintenance guide:

Preparation before installation:

Before disconnecting cables, please record the connection position of each cable so as to reduce errors during subsequent reinstallation.

Make sure to handle the cable carefully according to the instructions in the operation manual to avoid damage.

Replacement steps:

Gently pull out the cable connector part to avoid pulling the cable hard. If you need to handle the jumper manually, please refer to the detailed instructions in the operation manual.

Troubleshooting and maintenance:

When a fault occurs, the problem area can be quickly located through the LED indicator. In addition, the fuse blowing is also an important basis for judging the circuit abnormality.

Scope of application and restrictions:

Scope of application: It is suitable for the control and management of wind, gas and steam turbine drive components in Mark V turbine control system.

Restriction: As the Mark V series has been discontinued, this product belongs to the legacy series and is only applicable to specific industrial automation application scenarios.

Summary:

DS200DMCBG1ABB printed circuit board is an important part of Mark V turbine control system, and its design combines the technical characteristics of Speedtronic of General Electric. Although the series has been discontinued, its application value in the field of industrial automation is still recognized. Users should follow the instructions in the operation manual to ensure the safety and stability of the equipment.

Same series model

DS200DMCBG1ACB DOS DUP Processor Board 

DS200DMCBG1AED DOS DUP Processor Board 

DS200DMCBG1AFD DOS DUP Processor Board 

DS200DMCBG1AGE DOS DUP Processor Card 

DS200DMCBG1AJE DOS DUP Processor

DS200DMCBG1AKG IOS DUP Processor Board

DS200DMCBG1ALG DOS DUP Processor Board

DS200DMCBG2A DOS DUP Processor Board

DS200DMCBG2AKG IOS DUP Processor Board