EATON XV-460-12TSB-1-10 DOCUMENTATION/PDF/OC/EN

Display module technical parameters

Screen size and resolution

The monitor adopts a 12.1-inch color TFT display screen with a resolution of 800 x 600 pixels (SVGA standard) and a visual screen area of 246 x 185 mm.. This resolution is suitable for basic industrial display requirements, and can clearly present text and simple graphics.

Brightness and contrast

The brightness of the display is usually 350 CD/m and the contrast ratio is 350:1, which makes it still maintain good visibility in bright light environment. LED backlight design can not only save energy, but also extend the service life to 50,000 hours.

Color display ability

The display supports 65,536 colors, and the adjustable range includes 65,536 colors or 256 colors, which meets the color requirements of most industrial applications.

Touch screen technology

Using infrared touch technology, it has 95 x 71 logical channels and supports multi-touch operation. The surface of the touch screen is covered with safety glass to prevent reflection and provide better durability.

Second, the hardware configuration

Processor and memory

The equipment is equipped with RISC CPU, clocked at 400 MHz, with built-in 64 MB DRAM for operating system, program and data storage. At the same time, it is equipped with about 1.5 MB flash memory for data backup and 32 KB NVRAM for data retention. These configurations ensure the stability and efficiency of the equipment when running complex programs.

Storage expansion

Supports two Compact Flash card slots for storing operating systems, programs and data. This design provides a flexible data storage scheme, which is convenient for users to expand storage capacity according to their needs.

Power supply and power consumption

The nominal voltage is 24 V DC, and the allowable working voltage range is 20.4-28.8 V DC. The maximum power consumption of the equipment is 32 W, the typical power consumption is 14 W, and the heat dissipation capacity is 32 W.. These parameters show that the equipment has high reliability and stability in industrial environment.

Third, communication interface and expansibility

communication interface

Various communication interfaces are built into the device, including:

1 Ethernet interface (supporting 10/100Base-TX)

1 RS232 interface

2 USB host interfaces (USB 2.0)

1 USB device interface (USB 1.1)

CAN interface (galvanic isolation).

building block design

Support the expansion of communication module and USB module, and users can choose the appropriate module for installation according to their needs. This modular design improves the flexibility and application scope of the equipment.

Four, environmental adaptability and protection level

operating temperature range

The equipment can work normally in the environment of 0℃ to 50℃, with strong adaptability and suitable for various industrial environments.

the protection grades

The front panel reaches the protection level of IP65 and the rear part is IP20, which can effectively prevent dust and water from splashing into the equipment and ensure the reliability of the equipment in harsh environment.

Mechanical shock and vibration

The equipment conforms to IEC 60068-2-27 mechanical shock standard and IEC 68-2-6 vibration standard, and can withstand certain mechanical shock and vibration in industrial environment.

V. Application scenarios

The industrial-grade touch screen display is suitable for the following scenarios:

Industrial automation control: Through the built-in communication interface and modular design, it can be easily connected to PLC system or upper computer for data acquisition and control.

Data visualization: With its high-resolution display screen and rich color display ability, production data and monitoring pictures can be displayed in real time.

Remote monitoring: Remote monitoring and data transmission are realized through Ethernet interface and CAN interface.

Application in harsh environment: Its IP65 protection level and wide temperature design make it suitable for high temperature, high humidity or dusty industrial environment.

VI. Summary

This industrial-grade touch screen display has become an important tool in the field of industrial automation with its high brightness, high contrast, flexible storage expansion and powerful communication interface. Its solid design and wide applicability enable it to run stably in various harsh environments and meet the demand of modern industry for efficient and reliable display equipment.