HIMatrix Safety-Related Controller F2 DO 16 01 Manual

Introduction

This manual describes the technical characteristics of the device and its use. It provides information on how to install, start up and configure the module.

Structure and Use of this Manual

The content of this manual is part of the hardware description of the HIMatrix programmable electronic system. This manual is organized in the following main chapters: 

  Introduction 

  Safety 

  Product Description 

  Start-up 

  Operation 

  Maintenance 

  Decommissioning 

  Transport 

  Disposal

HIMatrix remote I/Os are available for the programming tools SILworX and ELOP II Factory. Which programming tool can be used, depends on the processor operating system of the HIMatrix remote I/O, refer to the following table:

Programming tool SILworX Processor operating system CPU OS V7 and higher ELOP II Factory CPU OS up to V6.x

Table 1: Programming Tools for HIMatrix Remote I/Os In the manual, the differences are specified by using:

  Separated chapters,

  Tables differentiating among the versions

HIMatrix system manual compact system document number hi 800 141 E.

HIMatrix system manual modular system F60

HIMatrix's Hardware Description Compact System

HIMatrix hardware description modular system hi 800 191 E

HIMatrix safety manual

Security function of HIMatrix system

HIMatrix safety manual railway application

The security function of HIMatrix system uses HIMatrix in railway.

Application hello 800 023 E hello 800 437 E

SILworX online help

Instructions on how to use SILworX ELOP second factory

Online help-

SILworX step one

Explanation on how to use the new ELOP protocol Factory, Ethernet IP protocol

Introduction to using SILworX, taking HIMax system as an example, hello 801 103 E.

The first step of the second plant of ELOP Brief introduction of the second plant of ELOP

Table 2: Hi 800 006 E

F6216A

F6217

F3322

F3330

F3331

F3332

F3333

F3334

F3422

F6705

F6706