HIMA F3330 8-channel output module

HIMA F3330 8-channel output module

Product Description 

F3330: 20-fold output module, safety-related resistance load or inductance load up to 500 mA (12 watts), lamp connection up to 4 W, integrated safety shutdown, safety isolation, and no output signal requirement category AK 1...6 module is automatically tested during operation. The main test procedures are:–Read back the output signal. The working point readback voltage of the 0 signal is ≤ 6.5 V. When it reaches this value, the level of No.0 may rise in the case of fault, which will not be detected.–Test the switching ability of signal and crosstalk (walk test). Output 500 mA, k to prevent short circuit and large internal voltage drop. 2 V allowable line resistance (input+output) at 500 mA load, 11 ohms ≤ 16 V, and the short-circuit current at the working point of undervoltage trip is 0.75...1.5 A Outp. Maximum leakage current. Maximum output voltage when the 350 A output is reset. Maximum duration of 1.5 volt test signal. 200 s space requires 4 TE working data 5 V DC: 110 mA24 v DC: an increase of 180 ma. 

Planning hints

– max. 10 output modules with nominal load may be used in one I/O

rack

– can be paralleled without external diodes

– for lamp load 4 W to 10 W refer to sketch:

HIMA F3330 8-channel output module: 20-fold output, safety-related resistance load up to 500 mA, integrated safety shutdown, and automatic testing during operation.

technical support

The safety-related controllers and I/O modules of the HIMatrix series together with the fast safeethernet safety-related communication are the perfect basis for small to medium-sized systems. Multiple applications are always efficiently networked with one another. All HIMatrix systems are certified for use up to SIL 3 and PL e (Cat. 4), as well as SIL 4 in accordance with CENELEC. Configuration and programming of HIMatrix runs completely via the user-friendly SILworX engineering tool. For faster validation and commissioning.