FOXBORO FBM201e Analog Input (0 to 20 mA) Interface Modules

(ISM) Radio-frequency Equipment -

Electromagnetic Disturbance Characteristics - Limits and Methods of Measurement

Meets Class A Limits

IEC 61000-4-2 ESD Immunity

Contact 4 kV, air 8 kV

IEC 61000-4-3 Radiated Field Immunity

10 V/m at 80 to 1000 MHz

IEC 61000-4-4 Electrical Fast

Transient/Burst Immunity

2 kV on I/O, dc power and communication

lines

IEC 61000-4-5 Surge Immunity

2kV on ac and dc power lines; 1kV on I/O

and communications lines

IEC 61000-4-6 Immunity to Conducted

Disturbances Induced by Radio frequency

Fields

10 V (rms) at 150 kHz to 80 MHz on I/O,

dc power and communication lines

IEC 61000-4-8 Power Frequency Magnetic

Field Immunity

30 A/m at 50 and 60 Hz

PRODUCT SAFETY

Underwriters Laboratories (UL) for U.S. and

Canada

UL/UL-C listed as suitable for use in

UL/UL-C listed Class I, Groups A-D;

Division 2; temperature code T4 enclosure

based systems. These modules are also UL

and UL-C listed as associated apparatus for

supplying non-incendive communication

circuits for Class I, Groups A-D hazardous

locations when connected to specified

I/A Series® processor modules as described

in the I/A Series DIN Rail Mounted

Subsystem User’s Guide (B0400FA).

Communications circuits also meet the

requirements for Class 2 as defined in

Article 725 of the National Electrical Code

(NFPA No.70) and Section 16 of the

Canadian Electrical Code (CSA C22.1).

Conditions for use are as specified in the

I/A Series DIN Rail Mounted Subsystem

User’s Guide (B0400FA).

European Low Voltage Directive 73/23/EEC

and Explosive Atmospheres (ATEX) directive

94/9/EC

CENELEC (DEMKO) certified as

EEx nA [nL] IIC T4 for use in CENELEC

certified Zone 2 enclosure certified as

associated apparatus for supplying non

incendive field circuits for Zone 2. Group IIC,

potentially explosive atmospheres when

connected to specified I/A Series processor

modules as described in the I/A Series DIN

Rail Mounted Subsystem User’s Guide

(B0400FA). Also, see Table 1 on page 8

ENVIRONMENTAL SPECIFICATIONS(1)

Operating

TEMPERATURE

FBM201e-20 to +70°C (-4 to +158°F)

Termination Assembly-20 to +70°C (-4 to +158°F)

RELATIVE HUMIDITY

5 to 95% (noncondensing)

ALTITUDE-300 to +3.000 m (-1.000 to +10.000 ft)

Storage

TEMPERATURE-40 to +70°C (-40 to +158°F)

Mounting

FBM201e

The module mounts on a modular baseplate. The

baseplate can be mounted on a DIN rail

(horizontally or vertically), or horizontally on a

19-inch rack using a mounting kit. Refer to DIN

Rail Mounted Modular Baseplates (PSS 21H

2W6 B4) for details.

TERMINATION ASSEMBLY

The TA mounts on a DIN rail and accommodates

multiple DIN rail styles including 32 mm (1.26 in)

and 35 mm 1.38 in).

Mass

FBM201e

284 g (10 oz) approximate

TERMINATION ASSEMBLY

Compression

181 g (0.40 lb) approximate

Ring Lug

249 g (0.55 lb) approximate

RELATIVE HUMIDITY

5 to 95% (noncondensing).

ALTITUDE-300 to +12.000 m (-1.000 to +40.000 ft)

Contamination

Suitable for use in Class G3 (Harsh) environments as

defined in ISA Standard S71.04. based on exposure

testing according to EIA Standard 364-65. Class III.

Vibration

7.5 m/S2 (0.75 g) from 5 to 500 Hz

PHYSICAL SPECIFICATIONS

Dimensions – FBM201e

HEIGHT

102 mm (4 in)

114 mm (4.5 in) with mounting lugs

WIDTH

45 mm (1.75 in)

DEPTH

104 mm (4.11 in)

Dimensions – Termination Assembly

See page 10

Part Number

FBM201e

P0924TA

TERMINATION ASSEMBLIES

See “FUNCTIONAL SPECIFICATIONS –

TERMINATION ASSEMBLIES” on page 8

PHYSICAL SPECIFICATIONS (CONTINUED)

Termination Cables

CABLE LENGTHS

Up to 30 m (98 ft)

CABLE MATERIALS

Hypalon®/XLP

TERMINATION CABLE TYPE

Type 1 – See Table 2 on page 9

BASEPLATE TO MAIN TA CABLE CONNECTION

FBM Baseplate End

37-pin D-subminiature

Termination Assembly End

25-pin D-subminiature

Construction – Termination Assembly

MATERIAL

Polyamide (PA), compression

PA, ring lug

TERMINATION ASSEMBLIES AND CABLES

Field input signals connect to the FBM subsystem via

DIN rail mounted Termination Assemblies, which are

electrically passive (see Figure 1). TAs for the

FBM201e module are available in the following forms:

Compression screw type using Polyamide (PA)

material

Ring lug type using Polyamide (PA) material

See “FUNCTIONAL SPECIFICATIONS –

TERMINATION ASSEMBLIES” on page 8 for a list of

TAs used with the FBM201e module.

Field Termination Connections

COMPRESSION-TYPE ACCEPTED WIRING

SIZES

Solid/Stranded/AWG

0.2 to 4 mm2/0.2 to 2.5 mm2/24 to 12 AWG

Stranded with Ferrules

0.2 to 2.5 mm2 with or without plastic collar

RING-LUG TYPE ACCEPTED WIRING SIZES

#6 size connectors (0.375 in (9.5 mm))

0.5 to 4 mm2/22 AWG to 12 AWG

A removable termination cable connects the DIN rail

mounted TA to the FBM via a field connector on the

baseplate in which the FBM is installed. Termination

cables are available in Hypalon® XLP.

Termination cables are available in a variety of

lengths, up to 30 meters (98 feet), allowing the

Termination Assembly to be mounted in either the

enclosure or in an adjacent enclosure. See Table 2

for a list of termination cables used with the TAs for

the FBM201e module