Separator OSE ..-01-067/OSE ..-91-067

Separator OSE ..-01-067/OSE ..-91-067

Separator OSE ..-01-067/OSE ..-91-067

Technical Data | High-performance centrifuge for efficient treatment

of fuel oil and lube oil in power plants

The GEA Westfalia Separator eagleclass

separator has been designed for the

continuous treatment of fuel oil and

lube oil in diesel engine and gas turbine

power plants as well as in off-shore

installations. The separator easily

removes impurities (e.g. sand, rust,

water) from the oil providing a clean

fluid which meets the quality requirements for safe power plant operation.

Materials of construction

Frame: Grey cast iron

Hood: Silumin

Main bowl parts: Stainless steel

Standard equipment

• 3-phase AC motor

• Rubber cushions with welding plates

• Flexible feed and discharge lines

• Pressure gauge and transmitter

Additional equipment (at extra cost)

• Motor control

• Control unit for automatic operation

• Pump

• Pre-heater

• Automatic steam valve

• Shut-off valve

• Controls for electric heaters

• Set of tools and spare parts

• Vibrocontrol

• Product temperature monitoring

• Flow indicator

• 3/2-way valve

• Pressure discharge of heavy phase

• All separation systems are available

as ready-to-connect modules

Your benefits

• Reduced operating costs resulting

from longer engine and component

life, fewer oil change intervals and

disposal volumes

• High throughput capacities

• High separation efficiency

thanks to GEA Westfalia Separator

softstream inlet

• Controlled and rapid solids ejection

due to GEA Westfalia Separator

hydrostop

• Minimized weight, space requirement and energy consumption

• Easy maintenance and operation

• Low noise level due to the belt drive

OSE technical data .. -01-067 OSE..-91-067Working principle and structural characteristicsThe information contained in this manual is only used as a non-binding description of our products and does not provide any guarantee. Binding information, especially information related to capacity data and applicability to specific applications, can only be provided within the concrete framework.Asking. Westfalia and Westfalia Separator are registered trademarks of GEA Machinery Equipment Co., Ltd. TD_OI-14-03-0011 ENGEA machinery equipment companyGmbH Westphalia separator group co., ltdNo.1 Werner-Habig-Streuli, Alder, Germany 59302Tel: +49 2522 77-0, Fax: +49 2522 77-5058.www.gea.comEquipped with an eagle separatorA bowl with a self-cleaning disc type, whichCan be optionally used for the clarification and purification of fuel oil.Lubricating oil. The product (1) is fed in the following way.A closed system. disconnectedThe light (2) and heavy (5) liquid phases arePressure is discharged centripetallyPumps (6, 7). Centrifuge operationWith adjusting ring for heavy objectsStage.Four 1 dirty oil feed/replacement water supply 2 clean oil discharge 3 pressure gauge 4 pressure transmitter 5 sewage discharge 6-center pump, dirty water 7-center pump, clean oil 8 separator 9 sludge storage space 10 sludge discharge 11 water discharge 12 operation water supplyTechnical data OSE 5 OSE 10 OSE 20 OSE 40 OSE 80 OSE 120Three-phase AC motorRated power (50 Hz) up to 4 kW up to 4 kW up to 7.5 kW up to 18.5 kW up to 45 kW 45-75 kWRated power (60 Hz) up to 4.6 kW up to 4.6 kW up to 8.6 kW up to 21 kW up to 46 kW 45-75 kWThe rotating speed is 50 Hz, 3000 rpm, 3000 rpm, 3000 rpm, 1500 rpm and 1800 rpm.The rotating speed is 60 Hz, 3600 rpm, 3600 rpm, 3600 rpm, 1800 rpm, 1800 rpm.Design in V1, V1, V1, V1, V1, V1Shell IP 55 IP 55 IP 55 IP 55 IP 55 IP 55Weight and transportation dataThe separator weighs 150 kg (331 lb), 205 kg (452 lb), 320 kg (705 lb), 1060 kg (2337 lb), 1620 kg (3571 lb) and 3000 kg (6614 lb).Chassis size(LxWxH)1100x600x100040x24x39 inches1280x700x103050x23x41 inches1300x870x103051x34x41 inches1800x1000x1400 mm71x39x55 inches1800x1050x1600 mm71x41x63 inches2000x1500x2100 mm79x59x83 inchesShipping volume 0.66 cubic meters 0.92 cubic meters 1.17 cubic meters 2.5 cubic meters 3.0 cubic meters 6.0 cubic meters.scaleAxbxc760x401x759mm 846x544x880 1005x550x1009 1283x737x1288 1611x867x1503 1778x1190x1942.30x16x30 inches 33x21x35 inches 40x22x40 inches 51x29x51 inches 63x34x59 inches 69x46x76 inches.Frame, hood and driving deviceThe separator with closed design is driven.Driven by a three-phase AC motor. Power is transmitted to the drum shaft through centrifugal clutch and flat belt.