Hirschmann MAR1040-4C4C4C4C9999SMMHRHHXX.X. Gigabit Ethernet Switch configurator

Product: MAR1040-4C4C4C4C9999SMMHRHHXX.X.

Configurator: MACH1040 Gigabit Ethernet Switch configurator

Configurator Description

The MACH1040 is an all-Gigabit version offering 16x 10/100/1000 Mbps RJ45/SFP combo ports to provide countless copper/fiber combinations (including

optional 4x PoE ports IEEE 802.3af). All ports support version 2 of the Precision Time Protocol in accordance with IEEE 1588 V2. Layer 3 functionality is

available with the R software option for this all-Gigabit switch.

Technical Specifications

Product description

Description Managed Ethernet/Fast Ethernet/Gigabit Ethernet Industrial Switch, 19" rack mount, fanless Design

Configurator Part Number 942004999

Port Type and Quantity 16 x Combo ports (10/100/1000BASE TX RJ45 plus related FE/GE-SFP slot)

More Interfaces

Power supply/signaling

contact

Power supply 1: 3 pin plug-in terminal block; Signal contact 1: 2 pin plug-in terminal block ; Power supply 2: 3 pin plug-in terminal block; Signal contact 2: 2 pin plug-in terminal

block

V.24 interface 1 x RJ11 socket

USB interface 1 x USB to connect auto-configuration adapter ACA21-USB

Network size - length of cable

Twisted pair (TP) 0 - 100 m

Single mode fiber (SM)

9/125 µm see Gigabit and Fast Ethernet SFP modules

Single mode fiber (LH)

9/125 µm (long haul

transceiver)

see Gigabit and Fast Ethernet SFP modules

Multimode fiber (MM)

50/125 µm see Gigabit and Fast Ethernet SFP modules

Multimode fiber (MM)

62.5/125 µm see Gigabit and Fast Ethernet SFP modules

Network size - cascadibility

Line - / star topology any

Ring structure

(HIPER-Ring) quantity

switches

<10ms (10 switches), <30ms (50 switches), <40ms (100 switches), <60ms (200 switches)

Power requirements

Current consumption at

230 V AC Power supply 1: 110mA max, if all ports are equipped with SFP ; Power supply 2: 110mA max, if all ports are equipped with SFP

Operating Voltage Power supply 1: 110/250 VDC, 110/230 VAC ; Power supply 2: 110/250 VDC, 110/230 VAC

Power Consumption max. 26 W

Power output in BTU (IT)/h max. 88

Software

Switching

CoS Queue Management, Disable Learning (hub functionality), Double VLAN Tagging (QinQ), Egress Broadcast Limiter per Port, Fast Aging, Flow Control (802.3X), GARP Multicast

Registration Protocol (GMRP), GARP VLAN Registration Protocol (GVRP), IGMP Snooping/Querier (v1/v2/v3), Independent VLAN Learning, Jumbo Frames, Protocol-based VLAN,

QoS / Port Prioritization (802.1D/p), Static Unicast/Multicast Address Entries, TOS/DSCP Prioritization, Traffic Shaping, VLAN (802.1Q), Voice VLAN

Redundancy

Advanced Ring Configuration for MRP, Fast HIPER-Ring, HIPER-Ring (Manager), HIPER-Ring (Ring Switch), HiVRRP (VRRP enhancements), Link Aggregation with LACP, Media

Redundancy Protocol (MRP) (IEC62439-2) - Redundancy Client, Media Redundancy Protocol (MRP) (IEC62439-2) - Redundancy Manager, MSTP (802.1Q), Redundant Network

Coupling, RSTP 802.1D-2004 (IEC62439-1), RSTP Guards, RSTP over MRP, Sub Ring Manager, VRRP, VRRP Tracking

Management Dual Software Image Support, TFTP, LLDP (802.1AB), LLDP-MED, SSHv1. SSHv2. V.24. HTTP, HTTPS, Traps, SNMP v1/v2/v3. Telnet

Diagnostics

Management Address Conflict Detection, Address Relearn Detection, MAC Notification, Signal Contact, Device Status Indication, TCPDump, LEDs, Syslog, Port Monitoring with

Auto-Disable, Link Flap Detection, Overload Detection, Duplex Mismatch Detection, RMON (1.2.3.9), Port Mirroring 1:1. Port Mirroring 8:1. Port Mirroring N:1. System Information,

Self-Tests on Cold Start, Copper Cable Test, SFP Management, Configuration Check Dialog, Switch Dump, Link Speed and Duplex Monitoring

Configuration

AutoConfiguration Adapter ACA11 Limited Support (RS20/30/40. MS20/30), Automatic Configuration Undo (roll-back), Configuration Fingerprint, BOOTP/DHCP Client with

Auto-Configuration, DHCP Server: per Port, DHCP Server: Pools per VLAN, DHCP Server: Option 43. AutoConfiguration Adapter ACA21/22 (USB), HiDiscovery, DHCP Relay with

Option 82. Command Line Interface (CLI), CLI Scripting, Full-featured MIB Support, Web-based Management, Context-sensitive Help

Security

IP-based Port Security, MAC-based Port Security, Port-based Access Control with 802.1X, Guest/unauthenticated VLAN, RADIUS VLAN Assignment, Multi-Client Authentication per

Port, MAC Authentication Bypass, Ingress MAC-based ACL, Ingress IPv4-based ACL, Ingress VLAN-based ACL, Access to Management restricted by VLAN, HTTPS Certificate

Management, Restricted Management Access, Appropriate Use Banner, SNMP Logging, Local User Management, Remote Authentication via RADIUS, Password change on first

login

Time synchronisation PTPv2 Transparent Clock two-step, PTPv2 Boundary Clock, Buffered Real Time Clock, SNTP Client, SNTP Server

Industrial Profiles EtherNet/IP Protocol, IEC61850 Protocol (MMS Server, Switch Model), PROFINET IO Protocol

Miscellaneous Manual Cable Crossing

Routing Full Wire-Speed Routing, Port-based Router Interfaces, VLAN-based Router Interfaces, Net-directed Bro