IOC4T-RLC16 Vibro-Meter company VM600 system and sensor technical data

Machine protection input and output module IOC4T

Trait

From Vibro-Meter® product line

6-channel signal interface card of MPC4

Attached terminal strip (48 terminals)

Ensure that all inputs and outputs have electromagnetic interference protection.

Contains 4 alarm relays controlled by software.

Using OC and Raw bus, the switch value can be programmed to RLC16 or IRC4 relay card.

Provide buffered output, voltage and current output.

All inputs and outputs have EMI protection.

Support hot plug.

Describe

IOC4T input and output cards are interface cards of VM600 series MPC4 cards. Installed at the back of ABE04X frame, connected by 2 rows of pins.

Connected to the backboard of the frame, it works in a slave mode, reading data and clock signals from MPC4. Terminal strip of IOC4T is connected with sensor/front.

The transmission cable of the device sends the original signal from the sensor to MPC4, and at the same time outputs the analog and switch values processed by MPC4.

All inputs and outputs of IOC4T are isolated, anti-electromagnetic interference and meet the EMC standard.

The DA converters on four boards provide calibrated output of 0-10V. Voltage-to-current converters on four boards convert signals into 4-20mA.

IOC 4T is equipped with four local relays, which are configured by software. At the same time, OC and Raw buses can be used to output switching values to RLC16 or IRC4.

Relay card, but bus address jumper is required.

Order information

Model description order number

IOC4T input/output card

Standard Edition 200-560-000-1Hh

Separate circuit board, meeting IEC/CEI 60255-5 standard 200-560-000-2Hh.

point out

"HH" stands for hardware version.

The increment of "H" can affect the major modification of product interchangeability.

Increment the "h" for small modifications that do not affect interchangeability.