NE870 Network Router ABB 3BSE080239R1

General info

Article number    3BSE080239R1    

Ethernet TX 10/100    8 ports    

Ethernet TX 10/100/1000    3 ports    

Ethernet SFP    -    

Network redundancy    Redundant Network Routing Protocol (RNRP)    

Managed    Router    

Mounting    DIN    

Layer    Layer 3 routing − RNRP    

Firewall    Yes    

NE870 is an industrial router that also acts as a firewall. The router/firewall can be utilized to segment a system into network areas and also security zones. NE870 is primarily intended to be used to separate client/server networks and control networks, to separate different control and safety networks, and also to create RNRP tunnel areas between RNRP networks.

The concept of security zoning is described in IEC 62443. In short, security zoning is a method to segment a system into zones with different security levels. A security level is complied with by implementing a combination of security countermeasures. The reason why it potentially could make sense to divide a system into security zones, which comply with different security levels, could be that the risk for different parts of the system varies. Another could be that the impact of a potential incident varies.

NE870 supports RNRP (Redundant Network Routing Protocol), which enables 800xA to have two physically separate networks, and thereby avoid a single point of failure.

Features and benefits

NE870 has a redundant power supply and alarm function

Wide operating voltage range (16 VDC to 60 VDC)

Back end holds a casted DIN clip for stable mounting on a DIN-rail

Digital IO for monitoring

Console port for management using CLI

USB port for easy save and load system configuration

3 x RJ-45 10/100/1000 Ethernet TX connectors

8 x RJ-45 10/100 Ethernet TX connectors

Status LED‘s