Converteam P111-6052 Advanced Micro Controller

The purpose of this document is to describe the features of the Advanced Micro Controller 2,providing basic information in a datasheet form.

2. DESCRIPTION

The main controller box used for the AMC-PLC, AMC-AU and AMC-DP is a Converteam designsupplied by Eltech, using the Arbor EmE7x-i701 controller board.

• Small rugged flange mounted box, for mounting on a vertical panel

• 70C temperature rating without fan

• Type tested.

• Shock test to 15g (IEC1131)

• Low cost, based on COTS Pentium M class embedded CPU.

• Higher Performance Pentium-M 1.40 GHz is also available to special order

• LED indication of Power, Healthy, Running

• Identity Dongle port for defining controller ID

• Integrated Ethernet ports (5 off), and 4 off serial links (RS232) - 3 available to applications.

• Integrated high density serial interfaces (for Marine DP)

• Used in the Marine Architecture (DP and Automation controllers, fieldstation PLCs &redundancy boxes), PEC drive Controllers & general purpose PLC application

ADVANCED MICRO CONTROLLER 

Converteam UK Ltd Converteam Ltd Version : C 2nd July 09

CPU 600Mhz Celeron MMemory 256MB DRAM, 256MB Compact Flash

Relative performance: Approx. 2 times AMC 1 (dependant on application code)

Power Supply 24V DC +/-20% supply. Consumes ~ 0.9A

LANs 5

Serial 4

USB 2 (Yamaichi latch system)

Expansion slots 4 PMC/PC104+ slots

Expansion uses: 16 channel serial (Serial 16+)

FIP, Profibus Master, Profibus Slave

Fieldbus

Fibre Optic Ethernet

Mounting Panel

Size w-h-d 234 x 206 x 120 mm

Other features Fanless

Watchdog

Temperature monitoring

Extractable Compact Flash HDD

Software platforms

supported:

Marine Controller (Isagraf)

HPCi

3. RE-ORDER CODES

The AMC comes ready assembled and installed with basic firmware from its supplier. The ordering

references below are Converteam OISs which define the kits of parts, and are used by the

procurement team and/or the supplier. Users only need specify the ordering code.

For Pentium-M 1.40 GHz version, contact Marine procurement department (P1xx-6x53).

Description Ordering Code Manufacturer Comment

AMC2 Controller:

5 network ports P110-6052 Eltech Solutions

AMC2 Controller:

5 network ports, 1 Serial16+ P111-6052 Eltech Solutions

AMC2 Controller:

5 network ports, 2 Serial16+ P112-6052 Eltech Solutions

AMC2 FIP Controller:

5 network ports, 1 FIP card P121-6052 Eltech Solutions

AMC2 FIP Controller:

5 network ports, 1 Serial16+, 1 FIP cards P121-6152 Eltech Solutions Suitable for DP upgrades

AMC2 FIP Controller:

5 network ports, 2 FIP cards P122-6052 Eltech Solutions Suitable for upgrades

& gateway applications

AMC2 FIP Controller:

5 network ports, 1 Serial16+, 2 FIP cards P122-6152 Eltech Solutions Suitable for DP upgrades

AMC2 FIP Controller:

5 network ports, 2 Serial16+, 2 FIP cards P122-6252 Eltech Solutions Suitable for DP upgrades

AMC2 Controller with Windows XP:

5 network ports P106-6052 Eltech Solutions General embedded PC

applications

AMC2 Controller:

5 network ports, 1 Profibus Master port P110-6152 Eltech Solutions

AMC2 Controller:

5 network ports, 2 Profibus Master ports P110-6252 Eltech Solutions

AMC2 Controller: P110-6552 Eltech Solution

Description Ordering Code Manufacturer Comment

5 network ports, 1 Profibus Slave port

AMC2 Controller:

5 network ports, 2 Profibus Slave ports P110-6652 Eltech Solutions

AMC2 Controller: 5 network ports, 1

Profibus Master port, 1 Serial16+ P111-6152 Eltech Solutions

AMC2 Controller: 5 network ports, 2

Profibus Master ports, 1 Serial16+ P111-6252 Eltech Solutions

AMC2 Controller: 5 network ports, 1

Profibus Master port, 2 Serial16+ P112-6152 Eltech Solutions

AMC2 Controller: 5 network ports, 2

Profibus Master ports, 2 Serial16+ P112-6252 Eltech Solutions