PCD235C101 3BHE057901R0101 AC800PEC series 丨ABB

Versatile and reliable – the AC 800PEC adapts to any application
Seamless integration into plant control

In today’s demanding market, a controller must not only deliver maximum performance but also provide transparency. In this respect, the AC 800PEC provides a large range of possibilities. Integrated communication ensures transparent, plant-wide data exchange and control – from overall plant control down to separate processes.

Use of ABB’s System 800xA with the powerful AC 800PEC controller permits uniform automation throughout the plant, seamlessly integrating advanced solutions into the process control system. Strict security procedures and effective firewalls prohibit unauthorized intrusions and ensure per manent system safety.

The AC 800PEC provides connectivity, using either native (built-in) or add-on functionality.

Native (depending on the configuration):

−MMS

− Modbus TCP Slave

− IEC61850

− ABB Powerlink

− ABB Drivebus (DDCS)

− Iba-PDA

− Optical Modulebus (S800)

− CANopen

Add-on:

− Using ABB CEX Modules:

− ABB Drivebus (DDCS)

− Profibus Master DPV1

− Modbus RTU − S100 I/O

− Masterbus 300

Using Anybus modules:

− CANopen

− ControlNet

− DeviceNet

− Profibus Slave

− Profibus Slave DPV1

− Profibus Master DPV1

− Profinet I/O

− EtherCAT Slave

− Ethernet/IP

AC 800PEC modular architecture in an excitation system: top reliability through redundant subsystems and distributed control logic

Well suited to a harsh environment – the AC 800PEC for traction Traction with its particularly harsh environmental conditions is one of the most important applications of the AC 800PEC. The controller operates through a wide temperature range (– 40 to + 70 °C), with vibrations according to traction standards. The compact solution is the ideal response to the demands of restricted spaces and allows integration of the processing unit together with all the I/Os in the same compact hardware device.

Top reliability is a must – the AC 800PEC in power generation Typically, excitation systems are used for generator control in power-plants where high reliability is the No. 1 requirement. Due to the very short process cycles, traditional redundancy concepts are no longer applicable. The modular architecture of the AC 800PEC not only greatly reduces the complexity of the overall system, but thanks to redundant subsystems also provides increased reliability. In the case of a problem in one subsystem, the main controller switches over to the remaining subsystems, which are scaled in such a way that the overall task can still be fulfilled. Should the main controller fail, a second controller is available in hot-standby

Precision for optimum quality – the AC 800PEC for industrial processes The most demanding function in a rolling mill is thickness control. By using the powerful AC 800PEC controller and its ability to implement C-Code beside the standard IEC 61131-3 program level, a new thickness control solution for cold rolling mills has been developed based on an MIMO (Multi Input Multi-Output) control concept. The benefit to the customer is an improvement in thickness deviation by up to 50 percent.