ABB Pressductor-PillowBlock Load cells series PFCL201

USE OF SYMBOLS This publication includes the following symbols with information regarding safety or other important information:

CAUTION Caution icon indicates important information. Risk of damage to equipment, property or software.

DANGER Danger icon indicates a hazard which could result in personal injury or even death.

ELECTRICAL Electrical warning icon indicates the presence of a hazard which could result in electrical shock.

ESD ESD icon indicates that electrostatic discharge precautions are needed.

Information Information icon alerts the reader to relevant facts and conditions.

Tip Tip icon advise how to design your product or how to use a certain function.

NOTICE 

The information in this document is subject to change without notice and should not be construed as a commitment by ABB AB. ABB AB assumes no responsibility for any errors that may appear in this document. In no event shall ABB AB be liable for direct, indirect, special, incidental or consequential damages of any nature or kind arising from the use of this document, nor shall ABB AB be liable for incidental or consequential damages arising from use of any software or hardware described in this document. This document and parts thereof must not be reproduced or copied without ABB AB’s written permission, and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. The software described in this document is furnished under a license and may be used, copied, or disclosed only in accord ance with the terms of such license.

CE and UK regulations marking

Provided that the installation is carried out in accordance with the installation instructions given in this manual this product meets the requirements for CE-marking specified in: the RoHS directive 2011/65/EU + AD 2015/863/EU, EMC directive 2014/30/EU and the Low Voltage Directive 2014/35/EU and Conformity to UK regulations: The Electrical Equipment (Safety) Regulations 2016, S.I.2016:1101, The Electromagnetic Compatibility Regulations 2016, S.I.2016:1091

Description

General

The load cell is machined from a single piece of stainless steel. The sensors are machined directly in the piece of steel and are positioned so that they are sensitive to force in the direction of meas urement and insensitive in other directions.

The load cell is mounted on a base with four screws, and the bearing housing is mounted on top of the load cell with four screws.

Every load cell comes calibrated and temperature compensated.

The load cells PFCL 201C/201CE/201CD are available in four measurement ranges, all variants have the same external dimensions.

The load cell PFCL 201C is equipped with a connector for the pluggable connection cable.

The load cell PFCL 201CE has a fixed connection cable with protective hose.

The load cell PFCL 201CD is provided with an acid-proof cable gland with a fixed PTFE- insulated connection cable.

ABB PFTL201C 10KN 3BSE007913R0010

ABB DSAI133A  3BSE018290R1

ABB DSAI133A 3BSE018290R1

ABB PFSK142 3BSE006505R1

ABB 216DB61 HESG324063R100/J

ABB 216EA62 1MRB150083R1/F 1MRB178066R1/F

ABB UNS4881b,V4 3BHE009949R0004

ABB UNS2882A 3BHE003855R0001

ABB UNS0887A-P 3BHE008128R0001

ABB UNS2880b-P,V2 3BHE014967R0002

ABB UNS2881b-P,V1 3BHE009319R0001

ABB TB852 3BSC950263R1

ABB UFC721BE101 3BHE021889R0101

ABB UFC718AE101 HIEE300936R0101

ABB PFTL101B 20KN 3BSE004203R1

ABB AV94A  HESG440940R11  HESG216791/A

ABB PP875 3BSE092977R1