SIEMENS SITOP power supply SITOP PSU8200/3800 3ph

SIEMENS SITOP power supply SITOP PSU8200/3800 3ph 

The three-phase power supply of SITOP PSU8200 product series is a high-power technical power supply for automation machinery and equipment.The three-phase power supply of PSU3800 product series is an ideal power supply for battery charging.

The main advantages of the product are:

● Wide voltage input range, which can connect almost all three-phase power grids in the world.

● Adjustable output voltage in the range of 12-14 V/24-28 (28.8) V/36-42 V/42-56 V.

● Power Boost function can continuously output 3 times the rated current in 25 ms (only

PSU8200）

● Extra-Power can provide 1.5 times the rated current for 5 seconds.

So as to turn on the load that requires high input current (PSU8200 only)

● Ultra-thin installation, no need to keep the installation spacing on both sides.

● Ambient temperature-25-70 C

● Optional short-circuit characteristics (constant current or latch off)

● Optional soft characteristic curve for parallel operation (so that power supply devices of the same type can bear uniform load).

● Three LED indicators make the working state of the power supply clear at a glance.

● Signal contact 12 V O.K./24 V O.K./36 V O.K./48 V O.K.

● In order to improve the availability of equipment, this reliable power supply device can also be extended to install SITOP.

Supplementary modules (redundancy module, selection module, buffer module) and SITOP DC uninterruptible power supply module.

● PSU3800 power supply has outstanding characteristics and is very suitable for battery charging.

Order data

6EP3436-8SB00-0AY0

6EP3446-8SB10-0AY0

6EP3446-8SB00-0AY0

6EP3424-8UB00-0AY0

6EP3436-8UB00-0AY0

6EP1437-3BA10

3RT2900-1SB20

Equipment description

SITOP PSU8200/3800 3ph is a master clock power supply for connecting to a three-phase AC network.

The output of the equipment is electronic regulated DC voltage, and the voltage can be set by potentiometer.

The output end of the power supply is potential isolated and designed with no-load protection and short-circuit protection. The LED indicator is used to display the running status.

The operating state of the equipment can be further processed through the signal contact. Remote control is realized by opening and closing the remote port.

And remote reset.

① AC input

② Output DC voltage

③ Potentiometer (output voltage)

④ Signal contact, remote port (6EP1437-3BA10 has no such contact)

⑤ indicator light (OUTPUT O.K., OVERLOAD, SHUTDOWN).

⑥ selector switch

⑦ guide rail slider8 convectionPet-name ruby upper/lower spac