AC 800PEC series PVD164A2059 3BHE014340R2059 high performance control system.

After adding the corresponding formula, the rectifier follows the predefined DC current, DC voltage and maximum allowable power set point, including all necessary chart-specific maintenance functions.

Function scalability: You and your process define what you need, and your process defines the required function level. Several pre-equipped software packages can easily obtain simple projects. The processing cycle time of distributed control system is as low as 1 millisecond. Using slow I/O to program man-machine interface in control generator is as low as 1 millisecond. Using interface programming in slow and fast I/O control generator to support almost all common fieldbus hardware time stamps can be provided to programmable logic controller as low as 1 millisecond on request. Using fast and slow I/ O programming in the control generator, the programmable automation controller cycle time is as low as 100 μs, fast and slow I/O MATLAB /Simulink programming and any speed process interface AC 800PEC of the control generator supply two types of I/O-fast, and it is very slow. The fast I/O system includes the time when reading and writing operations need less than 1 ms, while the slow I/O system covers the speed of more than 1 millisecond. The fast I/O system is dedicated to AC 800PEC, which uses equipment connected only by optical fiber links, and has obvious advantages compared with the electric concept: the fast communication I/O equipment between the controller and the transmitter has high electromagnetic interference resistance and no potential connection, and the slow I/O module of ABB S800 system can be added to any equipment, depending on the project in detail.

Multifunctional and reliable AC 800PEC is suitable for any application to be seamlessly integrated into factory control. In today's demanding market, it is necessary for operators to provide not only the best performance, but also transparency. In this respect, AC 800PEC offers a wide range of possibilities. Integrated communication ensures transparent factory-wide data exchange and control-from overall factory control to independent processes. ABB system 800xA and powerful AC 800PEC controllers promise the high-grade solution of unified automation and seamless integration of process control system throughout the factory. AC 800PEC supply connection, using this machine (built-in) or additional functions. This machine (depending on the equipment): MMS Modbus TCP slave IEC61850 ABB fast optical fiber link ABB Drivebus (DDCS) IbaPDA optical module bus (S800) CANopen add-on component uses ABB CEX module: ABB Drivebus (DDCS). Profibus master DPV1 Modbus RTU S100 I/O Masterbus 300 uses Anybus module CANopen to control the network DeviceNet Profibus slave profibus master DPV1 Profibus I/O Ethernet /IP.

AC 800PEC is very suitable for harsh environment-AC 800PEC has a huge installation foundation because the AC 800pec manipulator is used in different ABB solutions, which makes it possible to extract long-term life cycle experiences. Traction with particularly harsh environmental conditions is one of the most important applications of AC 800PEC. The manipulator can work in a wide temperature range (-40 to+70 C), and the oscillation conforms to the traction specification. A compact solution is an integrated unit that responds to the limited demand and promises to deal with it, and all I/O are in the same compact hardware device. Reliability is necessary-AC 800 PEC power supply is generally generated, and the excitation system used for generator control in high reliability power plants is the first requirement. Because of the short process cycle, the traditional concept of redundancy is no longer applicable. If the modular architecture of AC 800PEC is not so, it will only greatly reduce the overall complexity system, but the redundant subsystem will also provide reliability improvement. If there is a problem with a subsystem, the main controller switches to other subsystems, and these subsystems are shared so that the overall mission can still be completed. If there is something wrong with the main controller, the second controller is in a hot standby state. Accuracy of the best quality–The most demanding function of -AC 800 pec for industrial process rolling mills is thickness control. By using the powerful AC 800PEC manipulator, a new thickness control solution for cold rolling mill is based on MIMO (Multiple Input Multiple Output) control concept. The advantage for customers is that the thickness deviation is improved by up to 50%.

The AC 800PEC tool is used for all AC 800PEC.The controller handles the operation.