ABB Relion® 650series REC650/REL650/RET650/REB 650/REQ 650

Relion® Latest technology for Protection, Control, Measurement, and Supervision of T&D systems

Introduction to Relion® ƒRelion®…A strong family name as an identifier for the new generation of Protection and Control IEDs from ABB 

ƒFrom interconnected transmission grids to secondary distribution networks 

ƒ Relion is the globally recognizable product family name, firmly placing ABB protection and control products on top of the customers mind 

ƒHistory of strong products from Westinghouse, Brown Boveri, Asea, ITE Imperial Corporation. 

ƒABB’s identifier for all new protection and control products

Relion Series Family 

ƒ 670 - Optimized for transmission applications 

ƒ 650 - Optimized for transmission and subtransmission applications 

ƒ 620 - Optimized for High end distribution applications 

ƒ 615 - Standard series for distribution applications

Relion® 650 series 

ƒ 650 series 

ƒ Product portfolio addresses functionality in subtransmission applications 

ƒ REC650 Bay control IED ƒ REL650 Line distance protection 

ƒ RET650 Transformer protection ƒ REB 650 Bus Bar Protection 

ƒ REQ 650 Breaker control 

ƒ REG 650 Generator Protection 

ƒ Powerful and flexible hardware that is common for the 650 series 

ƒ Protection and control function types are identical in the 650 series 

ƒ Efficient engineering, parameter setting, test, commissioning, and operation 

ƒ PCM600 tool platform is used

Relion® 650 series 

ƒ Off-the-shelf, ready to use solutions 

ƒ Pre-defined functionality, application configuration ready-made at the factory 

ƒ Support for user defined names for signal and function engineering 

ƒ Minimal number of parameters & settings 

ƒ ABB new global base value concept 

ƒ Four setting groups 

ƒ IEDs deployment faster than ever before

Relion® 650 series 

ƒ Advanced local HMI functionality 

ƒ 15 dynamic and configurable LED in 3 colors and 3 pages 

ƒ 5 configurable pushbuttons 

ƒ Extensive condition monitoring 

ƒ Circuit Breaker monitoring 

ƒ Insulation / Gas monitoring 

ƒ Trip Circuit Supervision 

ƒ IED Power Supply monitoring 

ƒ One application specific main protection function 

ƒ Unified back-up protection functionality 

ƒ Supports 3-phase tripping

Relion® 650 series Hardware 

ƒ Platform based ƒ Few spare parts needed on module level ƒ Common module firmware ƒ Easy future hardware addition possibilities ƒ Minimized cost for maintenance and training ƒ I/O flexibility ƒ 10 or 20 keyed analog inputs in different configurations ƒ CT connections have short-circuits ƒ 1A or 5A settable on the same CT inputs ƒ Up to 220V on the settable VT inputs ƒ 14 –50 binary inputs, 9 –45 binary outputs ƒ Compression type or ring lug cable termination

Relion® 650 series Local HMI 

ƒ Efficient interaction with the IED ƒ Direct interaction with IEDs from LHMI ƒ Graphical display and measurement adapted to the application ƒ Control screen can be default ƒ National language support, unicode ƒ Forcing of binary output when in test mode ƒ Monitoring ƒ IED status indication LEDs ƒ Measurements ƒ Binary signals via indication LEDs ƒ Disturbances and events

Relion® 650 series Local HMI 

ƒ Control in REC650 ƒ Control of up to 8 apparatus in 1 bay,select before operate ƒ The exact presentation of the configured switchgear arrangement on LCD with IEC or ANSI symbols ƒ Commands with override operations ƒ Settings ƒ All parameters can be read and set via the local HMI ƒ Five configurable push button shortcuts with labels presented on the display for different actions, menu shortcut or commands

Relion® 650 series Local HMI 

ƒ Status indication LEDs indicate the status of the IED: ƒ Green ƒ Steady: In service ƒ Flashing: Internal failure ƒ Yellow: ƒ Steady: Disturbance recorder triggered ƒ Flashing: IED in test mode ƒ Red: ƒ Steady: Trip command issued ƒ Flashing: IED blocked ƒ Indication of binary signals via 15 three-color-state indication LEDs on up to three pages. Therefore, 45 LEDs with three colors gives 135 active state indications. Steady, flashing, latched, signal following ƒ Detailed information window on LEDs

Relion® 650 series Main function 

ƒ Each product in the 650 series has 1 main function ƒ REC650 main function is bay control ƒ REL650 main function is distance protection ƒ RET650 main function is differential protection ƒ REB 650 main function is bus bar protection ƒ REQ 650 main function is breaker control ƒ REG 650 main function is generator protection

Line protection with REL650 

ƒ Fast and reliable distance protection ƒ Reliable earth fault protection, for both solid-grounded and high impedance grounded systems. ƒ The selection between the two different grounding systems can be made by settings ƒ Reliable back-up protection over current, over voltage, thermal overload ƒ Autorecloserwith synchrocheck ƒ Scheme communication ƒ Three-phase tripping

Line protection with REL650 

ƒ Ready made application configurations for: ƒ Single breaker, double busbar, quadrilateral distance protection ƒ Single breaker, double busbar, Mho distance protection © ABB Group April 20, 2011 | Slide 21 Line protection with REL650 With quadrilateral or mho characteristics ƒ ½of 19”rack ƒ One 4I+1I+5V TRM ƒ 2 BIO cards, each with 9 Binary Inputs and 9 Binary Outputs ƒ Power Supply Module with 9 Binary Outputs ƒ COM module with 14 Binary Inputsone sensitive current input