EMERSON VE4017P0 M-series FOUNDATION™ Fieldbus I/O

M-series FOUNDATION™ Fieldbus I/O

DeltaV Distributed Control System

Increase I/O capacity while reducing wiring 

Takes advantage of all smart device capabilities 

Facilitates multi-drop 16 devices on one port 

Features secure uninterrupted control 

Provides third-party device support 

1:1 redundancy for M-series FOUNDATION™ Fieldbus I/O 

Autosense of redundant I/O 

Automatic switchover 

Provides synchronized control

Introduction 

 Are you looking for an efficient, yet robust, I/O subsystem? M-series FOUNDATION Fieldbus I/O is a modular subsystem that communicates digitally with field devices, increases your input/ output capacity, and gives you access to more information about your process than conventional I/O subsystems. If you want an efficient, economical, and secure process control system, use DeltaV™ M-series FOUNDATION Fieldbus redundant I/O. It greatly enhances device diagnostics that affect your control strategy and alerts operators to device malfunctions. The modular design of M-series FOUNDATION Fieldbus I/O offers flexibility during installation. It’s designed to be installed in the field, close to your devices. M-series FOUNDATION Fieldbus I/O is equipped with function and field-wiring protection keys to ensure that the correct I/O card is always plugged   into the corresponding terminal block. Modularity,   protection keys, and increased input/output capacity make M-series FOUNDATION Fieldbus I/O a smart choice for your process control system.

Benefits 

 Increases input/output. Use M-series FOUNDATION Fieldbus I/O instead of Classic I/O to increase information flow.   Take advantage of FOUNDATION Fieldbus digital communications to access additional information from   your smart devices. Get more information over one wire   than over multiple wires, as with Classic I/O. Takes advantage of all smart device capabilities. Increase your ability to communicate with your devices using DeltaV M-series FOUNDATION Fieldbus I/O; field device status is updated continuously. For multi-variable devices, all process variables are available on the single fieldbus connection. Facilitates multi-drop 16 devices on one port. Save on wiring expenditures by installing M-series FOUNDATION Fieldbus I/O in the field, close to the actual field devices. Mounting the controller with the I/O further reduces your wiring costs by eliminating   the need for long runs of multi-cores. Multi-dropping up to   16 devices on one port reduces your wiring expenses substantially. The integrated design of the M-series FOUNDATION Fieldbus I/O can eliminate the need for marshalling panels. This saves you even more time and money. Features secure uninterrupted control. A DeltaV system offers back-up link active schedule (LAS) to ensure secure control when upgrading a card or in the case of card failure.   LAS control is automatically transferred to the backup device when upgrading or experiencing card failure. Control is automatically transferred back to the H1 Interface Card   when the system detects a new card. This process requires   no user interaction. 

 Provides third-party device support. The DeltaV system provides third-party device support for devices that have successfully passed rigorous testing by Emerson. This testing ensures reliability and safety and allows you to benefit from the open fieldbus architecture when selecting field devices. 1:1 Redundancy for M-series FOUNDATION Fieldbus I/O cards. You can easily add redundancy to an existing system. DeltaV redundant M-series FOUNDATION Fieldbus I/O uses the same Series 2 I/O cards as non-redundant I/O. This allows you   to leverage your investment in installed I/O and in I/O spares.   No additional configuration is required. Autosense of redundancy. DeltaV autosenses redundant I/O which greatly simplifies the task of adding redundancy to the system. The redundant pair of cards are treated as one card in the system tools. Automatic Switchover. Should a primary I/O card fail,   the system automatically switches to the “standby” card without user intervention. The operator is given clear notification of a switchover at the operator display. Provides synchronized control. The DeltaV system provides the ability to assign DeltaV function blocks to run in the DeltaV M-series FOUNDATION Fieldbus I/O card. DeltaV function blocks that run in the DeltaV M-series FOUNDATION Fieldbus I/O card are included in the fieldbus macrocycle, and their execution is fully synchronized with function blocks running in fieldbus devices on the segment, thus minimizing scheduling delays that commonly occur in control loops in which the control spans the controller and   f ield devices. Increase your process control system’s level of sophistication using M-series FOUNDATION Fieldbus I/O. You are already   aware of the increased input/output capabilities and   improved communication with your smart devices.   Now go one step further and use AMS Device Manager with your M-series FOUNDATION Fieldbus I/O — from the control room or maintenance shop. Using AMS Device Manager, you can access all the necessary information to configure, commission, monitor, and troubleshoot all your FOUNDATION Fieldbus smart devices. Using AMS Device Manager you can also access status and diagnostic data from smart devices and monitor their performance. Increase product quality and minimize unplanned downtime with this dynamic application. Improve the productivity and profitability of your process control system. Fieldbus devices not manufactured by Emerson divisions are categorized as third-party devices. The DeltaV system provides third-party device support for devices that have successfully passed rigorous testing by Emerson and are registered by the Fieldbus FOUNDATION. This allows you to benefit from the open fieldbus architecture when selecting field devices.