KONG -Y
NameDescriptionContent
Location:

Compatible version of ALSTOM VP 325/02x series

From: | Author:kongjiang | Time :2024-12-12 | 1242 Browse: | 🔊 Click to read aloud ❚❚ ▶ | Share:

compliant version of the VP 325/02x family.

Intel® Pentium® M

Processor

Single Board Computer

The VP 325/02x-U is a PC-compatible high performance,high functionality one-slot VME single board computer.Supporting the 1.6 GHz Intel® Pentium®M processor, theboard features up to 2 Gbytes of 333 MHz DDR DRAM anda variety of interfaces including an option for anon-board Hard Disk Drive, CompactFlash™ or Hitachi GSTMicrodrive™. The VP 325/02x-U is suitable for a range ofdemanding applications within the industrial control,defense, telecomms, telemetry, scientific and aerospace markets. Its functionality can be further increased through the use of PMC modules. To simplify the board’s integration many popular industry standard operating systems are supported. The VP 325/02x-U is the RoHS 1.6 GHz Intel Pentium M processor: 

- 64 Kbytes L1 cache

- 1 Mbyte L2 cache

- no CPU fan needed; low power processor yy4291644@gmail.com

 1.8 GHz or 1.4 GHz processor versions (2 Mbytes L2 cache) also available; see VP 327/02x-U datasheet

 Single slot (for all option combinations)

 Up to 2 Gbytes of 333 MHz DDR DRAM (with ECC)

 High performance EIDE interfaces with optional on-board disk drive or CompactFlash™/Microdrive™ interface (in asingle-slot)

 2 x Serial ATA150 (SATA150) channels

 2 x Gigabit Ethernet interfaces

 PMC module interface (32/64-bit at 33/66 MHz)

 Expansion connector for dual site PMC carrier board

 1 Mbyte of BIOS Flash EPROM

 Graphics interface

 PS/2 keyboard and mouse port

 Line level stereo audio:

- input and output

 4 x RS232 serial channels

 4 x USB 2.0 ports

 Floppy disk interface

 1 x Parallel Printer Port (ECP, EPP and IEEE1284)

 Watchdog timer

 Long Duration Timer

 VME-64 Interface supporting A32/A24/A16/D64/D32/D16/D8(EO), MBLT64 and with support for fast hardware byte-swapping

 Support for VxWorks®, Windows NT®, Windows® 2000, Windows® XP, Windows® XP Embedded, RTX®, Linux®, Solaris™, LynxOS®, QNX® and MS-DOS® 

Central Processor

 1.6 GHz Intel® Pentium® M processor:-uses FC-PGA 478(micro Flip-Chip Pin Grid Array) package 64 Kbytes of primary (L1) on-die cache 1 Mbyte of secondary (L2) on-die cache 400 MHz Front Side Bus (FSB) no CPU fan

 1.8 GHz or 1.4 GHz processor versions (2 Mbytes L2 cache) available; see VP 327/02x-U datasheet

 utilizes 64-bit Intel® 855GME chipset:-supports 400 MHz bus frequency uses Intel® 6300ESB I/O Controller Hub

 ITP debug port DRAM

 supporting up to 2 Gbytes 333 MHz DDR ECC SDRAM:- 1 Gbyte soldered onboard up to 1 Gbyte provided via SODIMM socket single bit error correction

 accessible from processor or VME bus Hard Disk Interfaces

 EIDE interface:-accessed via P2 connector supports up to Ultra-DMA 100 for high performance drives two channels (primary and secondary)primary channel accessible via P2 connector secondary channel can be used for on-board 2.5 inch disk drive or CompactFlash module or Microdrive Type II drive (the board still fits in a single slot). Does not use PMC site connects to an optional Mass Storage Module (DS MSS/IFP, DS MSS/00x)

 2 x Serial ATA150 channels:-both via optional P0 connector transfer rate up to 150 Mbytes/s Ethernet Interfaces

 2 x channels supporting 10 Base-T, 100 Base-TX, 1000Base-T:- implemented by Intel® 82546GB LAN Controller via 64-bit PCI bus

 accessed via front panel RJ45 connectors Graphics Interface

 implemented by the Intel® 855GME GMCH:- resolutions up to 2048 x 1536 @75Hz up to 16M colors

 accessed via a front panel connector

 flat panel supported using DVI via P2 connector:- when ordered for a 3-row backplane the supplied breakout uses a DFP connector  when ordered for a 5-row backplane the supplied breakout uses a DVI-D connector Stereo Audio (See Note 2)

 line level output pair via P2 connector

 line level input pair via P2 connector

 independent legacy speaker output via P2 Serial Interfaces

 4 x RS232 serial interfaces:-2 x RS232 via RJ45 connectors on front panel 2 x RS232 via P2 connector (see Note 2)16550 compatible UARTs PMC Interface

 one PMC slot with I/O via front panel and optionally via P0:- 32/64-bit, 33/66 MHz PCI operation 3.3V or 5V signaling levels still available when EIDE drive option fitted

 provides expansion connector to a PMC carrier board with two additional 32-bit, 33MHz PMC sites Other Peripheral Interfaces

 4 x USB 2.0 (Universal Serial Bus) interfaces:- 1 x USB via front panel connector 3 x USB via P2 connector (see Note 2)

 keyboard and mouse interfaces via a single PS/2™ type connector on front panel

 PC-compatible Real Time Clock (Year 2000compliant)

 floppy disk interface via P2 connector

 parallel printer port interface (ECP, EPP and IEEE1284) via P2 connector

 watchdog timer

 1 x 32-bit Long Duration Timer with processor interrupt capability VME Interface

 implemented by Tundra® Universe II™ device

 VME Master/Slave

 A32/A24/A16/D64/D32/D16/D8(EO)/MBLT64

 fast hardware byte swapping

 auto system controller detect

 full interrupter / interrupt handler support

 bus error interrupt hardware Flash EPROM

 1 Mbyte of BIOS Flash EPROM Firmware Support

 Phoenix®BIOS

 comprehensive Power-On Self-Test (POST)

 LAN boot firmware included Software Support

 support for VxWorks®, Windows® NT,Windows® 2000, Windows® XP, Windows® XP Embedded, RTX®, Linux®, Solaris™, LynxOS®,QNX® and MS-DOS®Electrical Specification

 +5V@4.8A (typical at 1.6 GHz with 1 GbyteDRAM)

 +12V@0.0A; -12V@0.0A

 +12V and -12V routed to both PMC sites and PMC expansion connectorEnvironmental Specification

 operating temperatures:-0°C to +55°C (N-Series: 1.6 GHz)

 10% to 90% Relative Humidity, non condensing (operating)

 -40°C to +85°C (storage)

 10% to 90% Relative Humidity, non condensing (storage) Mechanical Specification

 6U form-factor

 single slot - width 0.8inch (20.3mm)

 utilizes 160-way DIN connectors for P1 and P2:-compatible with 96-way DIN connectors

 optional P0 (for VME64x backplanes only)

 shock:20g, 11ms, ½ sine (operating);30g, 11ms, ½ sine (non-operating)

 vibration:5Hz-2000Hz at 2g, 0.38mm peak displacement (operating);5Hz-2000Hz at 5g, 0.76mm peak displacement (non-operating) selected variants are supplied with VME64x handles 5-row backplane is required to provide P2 access to RS232, USB, stereo audio line input, stereo audio line o


  • AEROTECH SM Series High-Performance Stepper Motors
  • AEROTECH BLMSC Series Linear Motors
  • AEROTECH Custom Linear Motors
  • AEROTECH BMS Series Brushless, Slotless Rotary Motors
  • AEROTECH BM Series Brushless Rotary Motors
  • AEROTECH BLMX Series Linear Motors
  • AEROTECH BLMH Series Linear Motors
  • AEROTECH BLM Series Linear Motors
  • AEROTECH BLMC Series Linear Motors
  • AEROTECH BLMUC-143    Linear motor forcer with thermistor
  • AEROTECH BLMUC-111    Linear motor forcer with thermistor
  • AEROTECH BLMUC-95  Linear motor forcer with thermistor
  • AEROTECH BLMUC-79 Linear motor forcer with thermistor
  • AEROTECH BLMUC Series Linear Motors
  • AEROTECH Automation1 FLEX Distributed Amplifier Multi-Axis Servo Control System
  • AEROTECH Automation1 FLEX Distributed Amplifier Multi-Axis Servo Control System
  • AEROTECH Automation1 HXA4 6-Axis Hexapod Servo Drive
  • AEROTECH Automation1 iHXA4 6-Axis Hexapod Servo Drive with Motion Controller
  • AEROTECH Modular System Control Console
  • AEROTECH TV Series Transformers
  • AEROTECH TM Series Transformers
  • AEROTECH UFM Noise Filter Module
  • AEROTECH MFM Motor Filter Module
  • AEROTECH MPG Handwheel Pendant
  • AEROTECH Automation1 Multi-Axis Joystick
  • AEROTECH ETM Enhanced Throughput Module
  • AEROTECH Automation1 XL4s High-Speed, Single-Phase Linear Servo Drive
  • AEROTECH Automation1 XL2e Enhanced, Compact Linear Servo Drive
  • AEROTECH Automation1 XL5e Enhanced, Linear Servo Drive
  • AEROTECH Automation1 iXL5e Enhanced Linear Servo Drive with Motion Controller
  • AEROTECH Automation1 GI4 Laser Scan Head Controller
  • AEROTECH Automation1 SI4 Stepper Interface
  • AEROTECH Automation1 XI4 Servo Interface
  • AEROTECH AEROTECH Automation1 iXI4 Servo Interface with Motion Controller
  • AEROTECH Automation1 XC6e Enhanced, High-Power PWM Servo Drive
  • AEROTECH Automation1 iXC6e Enhanced, High-Power PWM Servo Drive with Motion Controller
  • AEROTECH Automation1 XC2 Compact PWM Servo Drive
  • AEROTECH Automation1 XC4 PWM Servo Drive
  • AEROTECH Automation1 GL4 Galvo Laser Scan Head Linear Drive
  • AEROTECH Automation1 XC2e Enhanced, Compact Servo Drive with PWM+
  • AEROTECH Automation1 XC4e Enhanced, PWM Servo Drive
  • AEROTECH Automation1 XR3 Multi-Axis Servo Drive Rack
  • AEROTECH Automation1 iXR3 Multi-Axis Servo Drive Rack with Motion Controller
  • AEROTECH Automation1 iXC2 Compact PWM Servo Drive with Motion Controller
  • AEROTECH Automation1 iXC2e Enhanced, Compact PWM+ Servo Drive with Motion Controller
  • AEROTECH Automation1 iXC4 PWM Servo Drive with Motion Controller
  • AEROTECH Automation1 iXC4e Enhanced, PWM Servo Drive with Motion Controller
  • AEROTECH Automation1 iPC Industrial PC with Motion Controller
  • AEROTECH EPICS & TANGO Drivers for Distributed Control Systems
  • AEROTECH .NET, C, Python & LabVIEW APIs Custom Application Develotpmen
  • AEROTECH Automation1 Industrial Ethernet Support
  • AEROTECH Automation1 iSMC Intelligent, Software-Based Motion Controller
  • AEROTECH Automation1 iXA4 1- 2- or 4-Axis PWM Servo Drive with Motion Controller
  • AEROTECH Automation1 XA4 1- 2- or 4-Axis PWM Servo Drive
  • CTI 2500-ADP2-DISC Discrete Wiring Adapter for Series 500
  • CTI 2500-ADP1 Analog Wiring Adapter for Series 500
  • CTI 2500C-RADP-RS485 Remote Base Controller Adapter for Series 500
  • CTI 2500C-RADP-RBC Profibus RBC Adapter for Series 500
  • CTI 2500C-PADP-120V 120VAC 50W Power Supply for Series 500
  • CTI 2500-RADP RBC Adapter for Series 500
  • CTI 2500-R4500 520/530/DBC Adapter for Series 500 - MATURE
  • CTI 2500-PADP Power Supply Adapter for Series 500
  • CTI 2500-IADP I/O Adapter for Series 500
  • CTI 2500-VP15A-N4-W7 15" Flat-Panel PC with Windows® 7 Embedded
  • CTI 2500S-27-1750 Slice I/O, Ethernet, RS232/485. 900MHz, 2DIO / 4UAI / 2AI
  • CTI 2500S-26-1750 Slice I/O, Ethernet, RS232/485. 900MHz, 8DIO / 2UAI
  • CTI 2500S-23-1750 Slice I/O, Ethernet, RS232/485. 900MHz, 4DI / 4DO / 2UAI / 2AO
  • CTI 2500S-27-1550 Slice I/O, RS232/485. 2DIO / 4UAI / 2AI
  • CTI 2500S-26-1550 Slice I/O, RS232/485. 8DIO / 2UAI
  • CTI 2500S-23-1550 Slice I/O, RS232/485. 4DI / 4DO / 2UAI / 2AO
  • CTI 2500S-27-1050 Slice I/O, Ethernet, 2DIO / 4UAI / 2AI
  • CTI 2500S-26-1050 Slice I/O, Ethernet, 8DIO / 2UAI
  • CTI 2500S-23-1050 Slice I/O, Ethernet, 4DI / 4DO / 2UAI / 2AO
  • CTI 2500C-32F-CJC 32-Pin Field Wiring Connector with Cold Junction Compensation
  • CTI 2500C-32F 32-Pin Field Wiring Connector
  • CTI 2500C-8-TC Eight Thermocouple Inputs
  • CTI 2500C-8-RTD Eight RTD Inputs
  • CTI 2500C-8-RL-FC 8 Form-C Relay Outputs
  • CTI 2500C-8-IDO-24V 8 Isolated 24VDC Outputs
  • CTI 2500C-8-IDO-120V 8 Isolated 120VAC Outputs
  • CTI 2500C-16-DO-24V Sixteen 24VDC Digital Outputs
  • CTI 2500C-16-DO-120V Sixteen 120VAC Digital Outputs
  • CTI 500C-16-IDI-24V Sixteen Isolated 24V AC/DC Digital Inputs
  • CTI 2500C-16-IDI-120V Sixteen Isolated 120V AC/DC Digital Inputs
  • CTI 2500C-16-DIDO-SIM Sixteen Digital Input and Output SImulator
  • CTI 2500C-16-DI-24V Sixteen 24V AC/DC Digital Inputs
  • CTI 2500C-16-DI-120V Sixteen 120V AC/DC Digital Inputs
  • CTI 2500C-RBC-RS485 RS485 Remote Base Controller
  • CTI 2500C-RBC-PRF Profibus Remote Base Controller
  • CTI 2500C-PS-24V-35 35-Watt DC Power Supply
  • CTI 2500C-PS-120V-35 35-Watt AC Power Supply
  • CTI 2500C-R8 Eight-Slot Base
  • CTI 2500C-R4 Four-Slot Base
  • CTI 2500C-R16 Sixteen-Slot Base
  • CTI 2500C-2572-B Fast Ethernet TCP/IP Adapter
  • CTI 2500C-J750 Compact Janus PAC with 3MB Project Memory
  • CTI 2500C-C300 CPU with 512K User Memory
  • CTI 2500C-C200 CPU with 256K User Memory
  • CTI 2500C-C100 CPU with 128K User Memory
  • CTI 2500C-8-AO 8 Analog Outputs
  • CTI 2500C-8-AI 8 Analog Inputs
  • CTI 2559-FCAL Precision Calibration Connector
  • CTI 2559-FPC 2559-FPC 40-pin screw terminal connector
  • CTI 2500-RFC PLC to RF Modem Cable
  • CTI 2500-40F 40-Position Standard Screw-Terminal Connector
  • CTI 2505 Vibration Sensor Interface Module
  • CTI 2554-A 4-Channel Isolated High Speed Counter Module
  • CTI 2553-A 2-Channel Mag Meter Input Module
  • CTI 2502 2-Channel High Speed Counter Input Module
  • CTI 2559-TC 8-Channel Thermocouple Input Module
  • CTI 2556-A 16-Channel Isolated Thermocouple Input Module
  • CTI 2556 16-Channel Isolated Thermocouple Input Module
  • CTI 2551-A 8-Channel Isolated Thermocouple Input Module
  • CTI 2559-RTD 8-Channel RTD Input Module
  • CTI 2557-A 16-Channel RTD Input Module
  • CTI 2557 16-Channel RTD Input Module
  • CTI 2552-A 8-Channel Isolated RTD Input Module
  • CTI 2534 8-Point Form-C Relay Output Module
  • CTI 2532 16-Point Form-A Relay Output Module
  • CTI  2531 32-Point Form-A Relay Output Module
  • CTI  2530 8-Point Form-C Relay Output Module
  • CTI  2562 8-Channel Analog Output Module
  • CTI  2560-A 8-Channel Isolated Analog Output Module
  • CTI  2501 8in/4out Analog Module
  • CTI  2558 8-Channel Analog Input Module
  • CTI  2555-A 16-Channel Analog Input Module
  • CTI  2550-A 8-Channel Isolated Analog Input Module
  • CTI  2599 8/16/32-Point AC Output Module