Yokogawa SDV144-S13 ProSafe-PLC to ProSafe-RS Migration
n GENERAL These General Specifications provides the hardware of the Migration Product that is used to replace the ProSafePLC controller with the ProSafe-RS Safety Control Station (SCS) in a short construction period using the existing ProSafe-PLC I/O cable, terminal board (MTA), and field wiring. The figure below shows a configuration example of replacing the Critical Discrete Module (CDM) of ProSafe-PLC with the Digital Input Module (SDV144) of ProSafe-RS
The following ProSafe-PLC I/O modules can be migrated. CDM: Critical Discrete Module SDM: Standard Discrete module CDO: Critical Discrete Output Module CAI: Critical Analog Input Module VIM: Voltage Input Module For the migration of modules other than the above, please consult with Yokogawa Sales Dept.
n MIGRATION PRODUCT CONFIGURATION The Migration Product can be used to migrate the module rack to ProSafe-RS while remaining the existing field interface hardware, such as the ProSafe-PLC terminal board. The Migration Product consists of the following components.
• Migration Adapter for signal distribution
• Migration Cable for connecting migration adapter and I/O module of ProSafe-RS
• Dedicated frame for installing migration adapter Migration Adapter The Migration Adapter is used to connect signals from the existing ProSafe-PLC terminal board (MTA) to the ProSafeRS I/O module via the ProSafe-PLC I/O cable.
l Migration Cable The Migration Cable is used to connect the ProSafe-RS I/O module and migration adapter.
l Fitting Frame The Fitting Frame is used as a base frame to install the migration adapter.
n ADAPTER INSTALLATION Up to 5 migration adapters (up to 10 adapters for digital output branch) can be installed in the adapter fitting frame. Also a ProSafe-RS safety control unit and safety node unit can be installed using the mounting holes at the front of the adapter fitting frame.
l Relation between Migration Adapter and Migration Cable The following tables show the relation between the migration adapter and migration cable that are used to replace the ProSafe-PLC I/O module with the ProSafe-RS I/O module.
Add: Building F05, High-tech Software Park, Xiamen City, Fujian Province
Tel: 0592-5211302
Mobile: 17750019513 (WhatsApp)
Email: yy4291644@gmail.com
ivy@kongjiangauto.com
Website: https://www.abb-sis.com