Vibro-Meter Temperature / Analog Acquisition  AMC10 Mk2  600-042

Temperature / Analog Acquisition  AMC10 Mk2  600-042

VibroSight ® / VM600Mk2 MPC4Mk2 and

condition monitoring licensing

In VibroSight ®  / VM600Mk2 MPC4Mk2 systems,

MPC4Mk2 + IOC4Mk2 machinery protection and

condition monitoring modules can provide machinery

protection system (MPS) functionality and/or

condition monitoring system (CMS) functionality,

depending on the requirements of the application.

For the VM600Mk2 MPC4Mk2 + IOC4Mk2 modules,

machinery protection functionality is available by

default for all versions of the module, while condition

monitoring functionality is optional. Accordingly,

MPC4Mk2 condition monitoring can be used by either

(1) ordering a version of the module with condition

monitoring enabled or (2) ordering and uploading a

condition monitoring license to a version of the

module without condition monitoring enabled (using

VibroSight System Manager).

Note: MPC4Mk2 condition monitoring also requires a

VibroSight® software edition / license that supports

condition monitoring.

For example, a VibroSight  / VM600Mk2 system

consisting of MPC4Mk2 + IOC4Mk2 modules can

initially be installed and used as a MPS only. Then,

CMS functionality can be quickly and easily added at

any time by upgrading the licenses for the

MPC4Mk2 + IOC4Mk2 module(s) and for VibroSight

software, as required.

KEY FEATURES AND BENEFITS

• From the vibro-meter ® product line

• Power supply for VM600Mk2/ VM600

ABE04x 19 ″ system racks with a height of 6U

• Input: AC-input and DC-input versions

• Outputs: +5 VDC and ±12 VDC

• Output over-voltage, short-circuit and

overload protection

• Status indicators

• High-power, high-performance, high

efficiency

• Minimal derating within the operating

temperature range

APPLICATIONS

• VM600Mk2/ VM600 machinery protection and/

or condition monitoring systems

• One RPS6U rack power supply powers a full

rack of modules (cards)

• Two RPS6U rack power supplies enable rack

power supply redundancy

DESCRIPTION

The VM600Mk2/ VM600 RPS6U rack power supplies

are designed for use in the VM600Mk2/ VM600

series of machinery protection systems and

condition and performance monitoring systems,

from Meggitt’s vibro-meter ® product line.

A VM600Mk2/ VM600 RPS6U rack power supply is

installed in the front of a VM600Mk2/ VM600 ABE04x

system rack (19 ″ system racks with a standard

height of 6U) and connects via two high-current

connectors to the VME bus of the rack’s

backplane. The RPS6U power supply provides

+5 VDC and ±12 VDC to the rack itself and all

installed modules (cards) in the rack via the rack’s

backplane