Woodward eeasYgen-3500XT-P2-RENTAL 8440-2290

Genset Control for

Complex Paralleling OperationWoodward raised the standard in genset paralleling control and power management system with the easYgen

3000XT Series controllers. These controllers come with standardized software that is simple to configure, yet

easily customized for individual applications. Enhanced connectivity enables fast, reliable and secure interfac

ing to other controls and communications systems while the enhanced hardware is a drop-in replacement for

previous generation easYgen-3000 Series Controls.

Targeted at enabling complex power management applications, the easYgen-3500XT supports easYgen | GC

3000XT to manage a large genset fleet of up to 496 sets and easYgen | LS-6XT to control up to 64 synchroniz

ing breaker or manual switches on up to 128 complex bus segments. Redundant load sharing is selectable us

ing Ethernet B and C networks for enhanced reliability. The control combines complete engine-generator con

trol and protection with advanced, peer-to-peer paralleling functionality and innovative features in a robust, at

tractive, user-friendly and all-in-one package. The easYgen-3500 XT controls are designed to direct connect up

to 690Vac and operate to 4000m above sea level without derating.

The easYgen-3500XT is available in two packages. P1. focused at complex paralleling applications provides

redundant Ethernet communication, LS-5 connectivity, and standard I/O set, while P2. Co-Gen/CHP model

offers expanded onboard I/O set, 3-ph busbar voltage measurement capability and phase rotation monitoring

between gen-busbar and busbar-utility. These packages are available without a display in a rugged metal hous

ing suitable for back panel installations (easYgen-3400XT-P1 and easYgen-3400XT-P2 respectively). A sophis

ticated touch screen remote panel (RP-3000XT) complements them as an operator control panel.

A version of easYgen-3500XT (easYgen-3500XT-P1-LT and easYgen-3500XT-P2-LT) is designed to operate

down to -400 C for outdoor applications.

FEATURES

• Enables several power generation topologies. Some frequently used are:

• only with easYgen-3500XT: 32 gensets, one generator group breaker and one mains circuit breaker

• with easYgen-3500XT and LS-5: 32 gensets and 16 breakers (Tie/GGB/MCB) or 16 gensets and 32

breakers on CAN bus

• with easYgen-3500XT and LS-6XT:  32 gensets and 32 breakers (Tie/GGB/MCB) on single or redundant

Modbus/TCP

• with easYgen-3500XT and GC-3000XT: 496 gensets, one generator group breaker and one mains circuit

breaker

• with easYgen-3500XT, LS-6XT and GC-3000XT: The control topology is cascaded in three layers. Layer

1 consists of easYgen (and also LS-6XT), Layer-2 group controls and Layer-3 LS-6XT. At Layer-1 total

496 gensets (16 x 31), at Layer-2 16 Group controllers and at Layer-3 64 LS-6XT on up to 128 segments

are supported. Communication between Layer-1 and Layer-2 controls is CAN, Ethernet A or hot redun

dant CAN/Ethernet A and between Layer-2 and Layer-3 controls is Ethernet B, Ethernet C or hot redun

dant Eth B/Eth C.

• Run-up synchronization / Dead Field Paralleling to quickly get several synchronous generators onto the load

• Three-phase true RMS power sensing with Class I accuracy

• Operation modes: AUTO, STOP, MANUAL, and TEST - accessible through face plate or discrete input

• Breaker control: Slip frequency / phase matching synchronization, open / close control, breaker monitoring

• Load transfer: open / closed transition, interchange, soft loading / unloading, Utility parallel

• Load share and device to device communication over CAN, Ethernet or hot redundant ETH/ETH, CAN/ETH

• Remote control via interface (Modbus TCP, Modbus RTU) and via discrete/analog inputs for adjusting

speed, frequency, voltage, power, reactive power, and power factor set points

FEATURES continued

• Freely configurable PID controllers for various control purposes, such as heating circuit control (CHP applications), water level, fuel level, pres

sure and / or other process variables

• Direct support to several ECUs: Scania S6. MTU ADEC ECU7/8/9. Volvo EMS2 & EDC4. Deutz EMR2 & EMR3. MAN MFR / EDC7. SISU

EEM, Cummins and Woodward EGS02 ECU

• Modbus master and modbus data telegram mapper support with dedicated PC tools

• CAN J1939 support to exhaust gas after-treatment (DPF, SCR) triggered by global diesel emissions regulations

• „System Update“ function ensures every unit recognizes other units in the network and helps isolate root-cause quickly during troubleshooting

• Time / Date synchronization over Simple Network Time Protocol (SNTP)

• Cylinder head / exhaust temperature monitoring (Temperatures come from J1939 or CANopen devices)

• Woodward ToolKit™ software for flexible setup from a single connection to the network. The ToolKit can be accessed either via USB, or via

Ethernet, or via CAN ports.

• Multi-lingual capability: English, German, Spanish, French, Italian, Portuguese, Japanese, Chinese, Russian, Turkish, Polish, Slovakian, Finn

ish, Swedish and an empty slot for custom language via a dedicated MS Excel based PC tool