ABB NKTU11-8 I/O Module to Termination Unit Cable

ABB NKTU11-8 I/O Module to Termination Unit Cable

I/O Module to Termination Unit Cable Manufacturers ABB, Bailey Model(s) ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90 Additional Information I/O Module to Termination Unit Cable, NKTU11-8, Connects I/O Module to Termination Unit, 8 feet long, non-PVC Estimated Shipping Size Dimensions: 0.0" x 0.0" x 0.0" (0.0 cm x 0.0 cm x 0.0 cm) 

Weight: 0 lbs 0.0 oz (0.0kg ) I/O Module to Termination Unit Cable

The connection mode of ABB NKTU11-8 I/O module to terminal unit cable is as follows:

Installation of Terminal Unit Cable: Before installing or removing the cable assigned to a slot, the module must be removed from its assigned slot. Otherwise, the module may be damaged.

Connecting steps:

Install J2 connector of NKTU01 or NKTU11 terminal unit cable into the slot allocated to I/O module on the backplane of module installation unit.

Insert the J1 connector of the cable into the P1 connector of the terminal unit.

Signal connection: according to

In the table in, the signal connection between P3 connector of NKTU01/NKTU11 terminal unit cable and P3 connector of I/O module is as follows:

P31 corresponds to P12

Other signal terminals also have corresponding connections.

Precautions:

When connecting or removing cables, make sure that the I/O module is unplugged from its cable connection.

If the terminal unit is connected to the I/O module, the I/O module needs to be pulled out from the backplane of the module installation unit first.

Through the above steps, ABB NKTU11-8 I/O module can be correctly connected with the terminal unit cable. Pay attention to follow safe and correct installation procedures during operation to avoid damaging the equipment.

REC650 1MRK008514-AB

PPD113B03-26-100110 3BHE023584R2634

SC510 3BSE003832R1

B3EA HENF315147R1

5SHY3545L0016 3BHB020720R0002 3BHE019719R0101 GVC736BE101

3ASC25H219B DATX133

TU890 3BSC690075R1

SAM3.0

DRA02

REF542 1VCR007346 G0028

SC510 3BSE003832R1