Beckhoff C6015-0010 Ultra-Compact Industrial PC

Beckhoff C6015-0010 Ultra-Compact Industrial PC

With a mounting space of just 82 x 82 x 40 mm, the C6015 Industrial PC represents Beckhoff's most compact entry-level Industrial PC and price savings of 25% or more (depending on the configuration) place it well below the previously least expensive x86 PCs.

Due to its extremely compact size, the versatile and flexible mounting options and the impressive computing power of the Intel Atom® processors, it fits into virtually any control cabinet and machine concept.

Apart from use for a wide range of automation tasks, the C6015 is mainly suitable for use as an IoT gateway, or as an edge device. The basis for this is the full integration and compatibility of TwinCAT and EtherCAT.

Product variants    Processor    Product status

C6015-0040    Intel Atom®, 2 cores (TC3: 40*) or

Intel Atom®, 4 cores (TC3: 50*)    regular delivery

C6015-0030    Intel Atom®, 2 cores (TC3: 40*) or

Intel Atom®, 4 cores (TC3: 50*)    regular delivery

C6015-0020    Intel Atom®, 2 cores (TC3: 40*) or

Intel Atom®, 4 cores (TC3: 50*)    regular delivery

C6015-0010    Intel Atom®, 1 core (TC2. TC3: 40*),

Intel Atom®, 2 cores (TC2. TC3: 40*) or

Intel Atom®, 4 cores (TC2. TC3: 50*)    regular delivery

Technical data    C6015-0010    Options

Device type    Ultra-compact control cabinet PC

Housing    aluminum zinc die-cast housing

Installation    mounting sheet at the rear wall    mounting sheet at the side wall or for DIN rail

Slots for hard disk/flash    1 slot for M.2 SSD

Cooling    passive with single side cooling plate

Free space for air circulation    5 cm (2") on top and bottom of the PC required

Protection rating    IP20

Operating temperature    0…55°C

Dimensions (W x H x D)    82 x 82 x 40 mm (3.2" x 3.2" x 1.6"), without mounting plate

Processor    Intel Atom® E3815. 1.46 GHz, 1 core (TC2. TC3: 40)    up to Intel Atom® E3845 1.91 GHz, 4 cores (TC2. TC3: 50)

Motherboard    compact motherboard for Intel Atom® E38xx

Memory    2 GB DDR3L RAM    up to 4 GB DDR3L RAM ex factory

Graphic    integrated in the processor

Ethernet    2 x 100/1000BASE-T on-board

Hard disks/flash    40 GB M.2 SSD    up to 320 GB M.2 SSD

Interfaces    1 x USB 3.0. 1 x USB 2.0. 1 x DisplayPort

Power supply    24 V DC    UPS CU81xx

Operating system    Windows Embedded Compact 7. English    Windows 10 IoT Enterprise, TwinCAT/BSD

Options    C6015-0010

C9900-C582    processor Intel Atom® E3827. 1.75 GHz, 2 cores (TC2. TC3: 40) and memory extension to 4 GB DDR3L RAM instead of Intel Atom® E3815. 1.46 GHz (TC2. TC3: 40) and 2 GB DDR3L RAM main memory.

Memory extension requires a 64 bit operating system or only 3 GB are addressable.

With Windows Embedded Compact 7 only one core is supported. Multicore support is available with Windows 10 IoT Enterprise and TwinCAT/BSD.

C9900-C583    processor Intel Atom® E3845. 1.91 GHz, 4 cores (TC2. TC3: 50) and memory extension to 4 GB DDR3L RAM instead of Intel Atom® E3815. 1.46 GHz (TC2. TC3: 40) and 2 GB DDR3L RAM main memory.

Memory extension requires a 64 bit operating system or only 3 GB are addressable.

Operating temperature range 0…50°C

With Windows Embedded Compact 7 only one core is supported.

Multicore support is available with Windows 10 IoT Enterprise and TwinCAT/BSD.

C9900-H591    80 GB M.2 SSD, 3D flash, extended temperature range, for C601x, instead of 40 GB M.2 SSD

C9900-H599    160 GB M.2 SSD, 3D flash, extended temperature range, for C601x, instead of 40 GB M.2 SSD

C9900-H675    320 GB M.2 SSD, 3D flash, extended temperature range, for C601x, instead of 40 GB M.2 SSD

C9900-Z468    Adapter DisplayPort to DVI with active level shifter, shielded, PVC, black, DisplayPort, plug, straight, IP20. 20-pin – DVI-D, plug, straight, female, IP20. 24+1-pin, 0.40 m

C9900-M664    mounting plate for C601x at the side wall, instead of plate at the rear wall

C9900-M665    mounting plate for lateral installation of the C601x; single part, not mounted

C9900-M666    mounting plate with DIN rail mounting adapter for C601x, instead of standard mounting plate

C9900-M667    mounting plate with DIN rail mounting adapter for C601x; single part, not mounted

C9900-S706    TwinCAT 2 PLC runtime for Windows Embedded Compact 7

C9900-S707    TwinCAT 2 NC PTP runtime for Windows Embedded Compact 7

C9900-S708    TwinCAT 2 NC I runtime for Windows Embedded Compact 7

Material compliance    C6015-0010

CAS No.    7439-92-1. 110-71-4

REACH SVHC    Lead, 1.2-Dimethoxyethane

REACH Annex XVII    compliant

REACH Annex XIV    compliant

SCIP No.    SCIP submission in progress

POP    compliant

RoHS    compliant with exemption

RoHS exemption    6c: Copper alloy with a mass fraction of up to 4% lead, 7c-I: 

Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors

China-RoHS    www.beckhoff.com/china-rohs-ipc

CA Prop65    www.beckhoff.com/prop65

Disclaimer    This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers.

This information is in line with the current standard of technology and our suppliers’ technical documentation.

The absence of the substances is not verified by Beckhoff Automation by means of analytical tests.

When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply.