IC3600LINE1 General Electric Light indicator board

IC3600LINE1 General Electric Light indicator board

Part Number IC3600LINE1 Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockIC3600LINE1 is a Light Indicator Board manufactured and designed by General Electric as part of the Mark II Series used in GE Speedtronic Control Systems. A light indicator circuit board is an electronic circuit board designed to control and display information using light indicators, typically LEDs (Light Emitting Diodes). These boards are widely used in various applications to convey important information to users or operators in a visual and easily understandable manner. 

LIGHT INDICATOR CIRCUIT BOARD CONSISTS OF SEVERAL KEY COMPONENTS:LEDs: The primary components are the light-emitting 

diodes (LEDs) that emit light when an electric current passes through them. LEDs are available in various colors, such as red, green, yellow, and blue, allowing for different types of information to be displayed. 

Control Logic: The circuit board includes control logic, such as microcontrollers or integrated circuits, that process input data and determine the appropriate LEDs to illuminate based on the information received. 

Input Interface: The circuit board may have input interfaces, such as sensors, switches, or communication ports, to receive data or commands from external sources or systems. Power Supply: A power supply section provides the necessary electric current to illuminate the LEDs on the board. 

Output Drivers: Output drivers, such as transistors or shift registers, are used to control the current flow to the individual LEDs, allowing them to be turned on or off selectively. Protocols and Communication: In some cases, the circuit board may support communication protocols like UART, I2C, or SPI to interface with other devices or systems for data exchange. COMMON APPLICATIONS OF LIGHT INDICATOR CIRCUIT BOARDS INCLUDE: Electronic devices: Indicating power status, battery levels, network connectivity, and system errors in devices like smartphones, laptops, and routers. 

Automotive systems: Displaying warning lights for low fuel, engine issues, tire pressure, and other vehicle diagnostics. Industrial control systems: Monitoring machine status, process parameters, and safety warnings in manufacturing plants.LIGHT IND CARD

About the IC3600LINA1

The Light Indicator Card marked IC3600LINA1 is a GE FANUC component for the Mark I/Mark II series.  These two series were built with four basic parts, including a control system featuring a redundant fail-safe which allowed different types of control to back up each other (temperature control backs up speed control and vice versa,) a protection system built with dual and triple fail-safes to allow the system to continue running as alarms annunciate issues, a sequential system with logic for automating basic procedures like startup and shutdown, and a power supply that is independent of the rest of the system.  

The IC3600LINA1 is marked with several codes, including 006/06, 002/05, 68A989076, and “REH.”  It also carries the GE U.S.A logo and its board identification number. The board is numbered on either side of twenty-six metal pins; on the edge side of the pins, it is numbered 1/5/15/25/35/45/51.  On the board side, it is numbered 1 through 16. These numbers seem to correspond to the interior board components, which are otherwise only designated by a label at the top of each line.

IS230SNRTH2A

IC694CHS392

8810-HI-TX-01

208D9845P0008

IC200GBI001

IC670MDL930

IS210BPPCH1AEC

IS210AEBIH1BED

IC698CHS009