IS200ICBDH1B Innovative control substrate developed by General Electric

IS200ICBDH1B Innovative control substrate developed by General Electric

Describe 

Part Number IS200ICBDH1B Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockIS200ICBDH1B is an Innovation Control Base Board developed by GE. It is a part of the EX2100 excitation system. 

The GE Control System is designed to provide reliable and efficient generator excitation in a range of power generation applications. The system's advanced technology enables it to handle the complex and demanding requirements of modern power plants. The multiple controllers, power bridges, and protection modules work together to provide the optimal excitation solution for any given generator. The EX2100 Excitation Control generates field excitation current to control the AC terminal voltage of the generator and/or the reactive volt-amperes. It is a complete static excitation system for generators on new and retrofit steam, gas, and hydro turbines. Features ICBDH1B is intended to serve as an auxiliary board. It's a small, rectangular-shaped board with numerous inputs and outputs. There are five pre-drilled openings on the board, one in the center and one at each corner. Conduction sensors account for two of these. Three female backplane connectors are located near the center of the board surface. A single reset switch, several integrated circuits, three transformers, a fuse, and four transistors are also present on the board. There are three backplane connectors (female). Each backplane connector has a "Pin 1" designation. Four jack connectors (female). These are labeled J11A/J11B and J12A/J12B and are placed side by side. There is one 9-pin D-Sub connector (female). 

This is known as J9. There is one 8-pin mini-DIN connector (female). This is known as J10. Four stab-on connectors. These are referred to as Chas1/Chas2 and CCom1/CCom2. There are two conduction sensors. Four male vertical pin connectors ranging in size from 9 to 40 pins. Characteristics One of the key benefits of the EX2100 Excitation Control System is its ease of integration with other power generation systems. This integration ensures seamless operation and helps minimize the risk of system failure. 

The system can be integrated with turbine controls, static starters, distributed control systems, and human-machine interfaces (HMI) without the need for third-party interfaces or gateways. This makes the EX2100 Excitation Control System an ideal choice for power plants that require an advanced and flexible excitation solution. Another advantage of the Excitation Control System is its advanced protection features. The protection module provides a range of protection functions to ensure that the generator is protected from faults and malfunctions. This includes over-voltage protection, under-voltage protection, over-current protection, and over-speed protection, among others. 

These protection functions help ensure the safe and reliable operation of the generator and the overall power generation system. Backplane connectors are built along the rear board edge of the cards that plug directly into rack systems. This enables simple plug-in/plug-out capability, which simplifies component maintenance and replacement. Software Features The exciter control code is executed by microprocessor-based controllers (ACLA and DSPX). The software is made up of modules (blocks) that work together to provide the necessary system functionality. Variables are stored in random-access memory, while block definitions and configuration parameters are stored in flash memory (RAM). Traditional analog controls are emulated by the exciter application software. It employs an open architecture system with a library of pre-configured software blocks from the toolbox. Individual blocks, such as logic gates, proportional integral (P.I.) regulators, function generators, and signal level detectors, perform specific functions. The control switches between two modes: generator voltage regulation and direct control. The control incorporates generator protection functions such as over and under-excitation limiting, power system stabilization, and V/Hz limiting. Hardware Features Auxiliary cabinet for field flashing and protection circuits such as de-excitation and shaft voltage suppression. 

Power conversion cabinet containing SCR cells, cooling fans, DC contactors, and an AC disconnect. Control System Toolbox Connection The exciter backplane's toolbox connector accepts an RS-232C cable, which connects an external computer to the DSPX board. This connection is only for maintenance. To communicate with controllers M1, M2, and C, three 9-pin connectors are located at J303B, J310B, and J313B.INN.CTRL BASE CRD

Related models

0880001-01

104X905BA603

12A0-0103-A3

12HFA51A42H

12HGA11J52

269 PLUS-D/O-100P-125V

369-A200

369B1860G0026

369B1860G0030

369-C100

369-C101

369-HI-0-0-0-0

369-HI-0-M-F-E-0

369-HI-R-M-0-0-0-E

369-HI-R-M-0-E-0

369-HI-R-M-0-P-0-E

application area

Industries such as petroleum, coal, metal ore, nonmetal ore and wood;

Industries of basic materials, power and fuel.

Metal smelting and processing, coking and coke, chemistry, chemical raw materials, cement, wood-based panels and power, petroleum and coal processing industries;

Machinery and equipment manufacturing industry, metal structure, cement products, chemical fertilizer and pesticide industry.

Wind power generation, thermal power generation, hydropower generation, nuclear power generation and other energy sources; For example, thermal power in China is mainly distributed in the northern coal-producing areas of China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

About Xiamen kongjiang automation technology co., ltd:

Xiamen kongjiang automation technology co., ltd is a technology-based entity company established on may 11th, 2017, located in Xiamen, Fujian province. The company is mainly engaged in the sales of imported industrial control parts, electrical engineering design, installation, programming, debugging, construction and other businesses. The company has an experienced and well-trained technical team, which is committed to providing customers with services such as electrical automation system development, automatic upgrading and transformation of the original production line, energy-saving trans