IS200TPROH1C Emergency protection (TPRO) terminal board

IS200TPROH1C Emergency protection (TPRO) terminal board

Part Number IS200TPROH1C Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockThe IS200TPROH1C is an Emergency Protection (TPRO) terminal board developed by GE. Three PPRO I/O packs are housed on the Emergency Protection (TPRO) terminal board. It has a pair of potential transformers (PTs) for bus and generator voltage input and conditions speed signal inputs for the PPROs. There are three DC-37 pin connectors on it, one on each side of the PPRO pack connectors. A cable leading to a Mark* VIe backup trip relay terminal board is accepted by each DC-37. TPROH1C has two pluggable blocks with 24 barrier terminals each. Do not inadvertently cross-connect the 240 V ac and dc voltages in 240 V ac applications. The peak voltage will be higher than the MOV rating, causing the MOV to fail. Most ac supplies have a grounded neutral, so if an unintended connection between the 125 V dc and the ac voltage is made, the sum of the ac peak voltage and the 125 V dc is applied to MOVs connected between dc and ground. On the other hand, in 120 V ac applications, the MOV rating can endure the peak voltage without failing. IS200TPROH1C Compatibility TPROH1C is a simplex and TMR application that works with the PPRO I/O pack. TPROH#C links to three PPRO I/O packs in TMR systems. 

TPROH1CD and H12C both accept three PPROH1As for direct attachment and include DC-37 connections for three cables to the backup trip relay terminal boards. IS200TPROH1C Installation TPROH1C and a plastic insulator are mounted on a DIN-rail-mounted sheet metal carrier. The TPRO and insulator can also be mounted on a sheet metal assembly that bolts directly into a panel. Typical #18 AWG wires are used to connect speed signals and PT inputs to the terminal block. The TPROH1C barrier terminal block can be removed to replace the board. The TPROH2C is a removable Euro-Block type terminal block that can be plugged in. Please contact us. Gmail: yy4291644@gmail.com   Enterprise mailbox: ivy@kongjiangauto.com 

 IS200TPROH1C Operation On terminals 31-48, nine-speed inputs are displayed. The consumer can get P24 output from Terminals 5, 9, and 11. The return path for the P24 output is Terminal 8 (MARET). ORing the 28 V power supply of I/O packs R, S, and T yield the P24 output. P24 V output can be accessed even if any of the I/O packs are turned off. Terminals 6, 10, and 12 are 4-20 mA inputs that are fanned to R, S, and T PPRO connections and are allocated for future control extensions. For the 4-20 mA input, Terminal 8 (MARET) serves as a return path. Diagnostics Electronic ID parts on the TPRO board and backup trip relay terminal board are scanned during power initiation. PPRO uses this data to verify that the hardware configuration is correct before initiating normal operations. Configuration When thermocouple inputs are used, all JPX, JPY, and JPZ jumpers should be in the (1, 4, 7, 10) position; when 4-20 mA inputs are used, all JPX, JPY, and JPZ jumpers should be in the (3, 6, 9, 12) position.TERM. BD., PROTECTIV

Related models

DS200SHVMG1AFE

IC660ELB912

IS230TVBAH2A

IS215VCMIH2BB IS200VCMIH2BCC

IS210MACCH1AGG

SR489-P5-LO-A20-E

MVR1600-4601

D20 EME 2400-21004

IC697MDL350

8101-HI-TX-02

IC698PSA100

IC698RMX016-ED

IC660BBD025

531X303MCPARG1

DS200FSAAG1ABA