IS200VPWRH1A Mark VI series terminal board

IS200VPWRH1A Mark VI series terminal board is used for turbine management

Part Number IS200VPWRH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI Function Module Availability In StockIS200VPWRH1A is a terminal board developed by GE under the Mark VI series. The Mark VI is a gas/steam turbine control system from GE that is part of the Speedtronic line, which has been used for turbine management for over four decades. The MKVI is the third system in this series to provide triple redundant backups on essential controls and protection parameters. The component is intended to be a daughterboard or sub-assembly of the IS215VPROH215 board. The top board of this assembly, this board, connects to the lower board through four standoffs connected via screw mounts through factory-drilled holes. The PCB also attaches to the assembly's broad front faceplate. The board is outfitted with several board connectors and plugs. This contains a right-angled cable connection assembly that installs into the front faceplate, two 64-position female plugs that run parallel to the faceplate, and a single 3-position plug at the PCB's rear. This socket connects to a power assembly placed in the front faceplate through surface wiring. The board is devoid of any kind of backplane. In one corner of the component, there is a red and green two-light LED indicator. This attaches to the front faceplate. There are also two LED strips near the opposite front corner. These LEDs are available in green or clear. They are also compatible with the front faceplate. The board is densely packed with resistors and capacitors, including carbon composite resistors (CCRs) and two huge polyester vinyl capacitors. The board contains numerous integrated circuits, one transformer, several transistors, multiple lines of test points, and a heat sink component with six fins that attaches to the board via six screws positioned in standoffs.PROTECTION MODULE POWER

About the IS200VPWRH1A

The IS200VPWRH1A is a Mark VI board component created by General Electric. The Mark VI is one of GE’s gas/steam turbine management systems and is part of the Speedtronic line, which has been used for turbine management for over forty years.  The MKVI is the third of these systems to include triple redundant backups on critical controls and protection parameters.

The IS200VPWRH1A is designed to function as a daughterboard or sub-assembly of the IS215VPROH215 board.  The IS200VPWRH1A is the top board of this assembly and connects to the lower board using four standoffs connected via screw mounts through factory-drilled holes.  The IS200VPWRH1A also connects to the wide front faceplate of this assembly.

The IS200VPWRH1A is built with several board connectors and plugs.  This includes a right-angled cable connector assembly that mounts into the front faceplate, two 64-position female plugs that are placed parallel to the faceplate, and a single 3-position plug located toward the rear of the PCB.  This plug uses surface wiring to connect to a power assembly located in the front faceplate. The board does not include any type of backplane.

The IS200VPWRH1A has a red and green two-light LED indicator located in one corner.  This mounts into the front faceplate. There are also two strips of LEDs located near the other front corner.  These LEDs are green or clear. They also mount into the front faceplate. The board is populated with many resistors and capacitors, including carbon composite resistors (CCRs)  and two large capacitors made of polyester vinyl material. The board has multiple integrated circuits, one transformer, several transistors, multiple lines of test points, and a heat sink component with six fins that attaches to the board using six screws mounted into standoffs.