GE Manufacturing Policy IS2020JPDBG01 Series Mark VI/VIe Function Module

Part Number IS2020JPDBG01 Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockIS2020JPDBG01 is a Power Distribution Board manufactured and designed by General Electric as part of the Mark VIe Series used in GE Distributed Control Systems. 

The JPDB board for ac power distribution regulates, watches over, and disperses ac power. Two line filters and an IS200JPDB circuit board are included in the module. Two separate ac distribution circuits, each rated for 20 A at 115 or 230 V ac, are included in the module. To prevent PPDA alerts when only one source of ac power is available, the input circuits should be wired in parallel. There is one fused output and three fused and switched branch circuit outputs for each circuit. There is a connection available for a JPDF 125 V dc distribution module that is optional. 

The IS200JPDB features status feedback for all fused circuits as well as passive monitoring circuits for both ac magnitudes. On connector P1, which is suitable for cable connection to a board containing a power diagnostic PPDA I/O pack, are the monitoring circuits. The P2 port on the IS200JPDB allows monitoring signals from other power distribution system cards to be passed through. COMPATIBILITY: The JPDE, JPDF, JPDS, and JPDM feedback signal P1 and P2 connections on the IS2020JPDB are compatible, creating a PPDA I/O pack. The ac input on the JPDF module bearing the same name can be used with connector JAF2. INSTALLATION: In a PDM cabinet, the IS2020JPDB module is base-mounted vertically on a metal rear base. The Protective Earth system and the IS2020JPDB sheet metal must be connected. For the first ac circuit, input power is delivered to terminals AC1H (line) and AC1N (neutral), and for the second ac circuit, AC2H (line) and AC2N (neutral). There must be grounded neutral connections on both ac inputs. The system's output circuit connections follow the documentation. A 50-pin ribbon cable is needed to link the JPDB connection P1 to the P2 connector on the board housing the PPDA if the power distribution system has a PPDA power diagnostic I/O pack. Other core PDM boards may be connected by using the P2 connector for this connection. 

OPERATION: A terminal board on the right side of the JPDB module has two ac power sources linked to it. Under the IS200JPDB circuit board, the ac power is directed to the ac line filter assembly. The J1 connector on the JPDB circuit board is connected to the filter assembly by a wire harness. The circuit board for the IS2020JPDBG01 module is the IS200JPDBH1A. Since J1 is attached directly to the output branch circuits, this board does not have a connection for an ac source selector. The IS200JPDBH2A circuit board is used by the IS2020JPDBG02 module. An ac source selector is required for use with the board. The JSS1 connector is mounted to the board in it. JSS1 receives external filtered ac from connector J1. To power, the branch circuit outputs, the source selector output returns to the JSS1. Two DACA power conversion modules are powered by JAF1 directly feeding power from input connector J1 to a neighboring, optional JPDF board. For use as an ac backup for systems using a 125 V dc battery, the DACA modules convert ac power to 125 V dc.PDM, AC POW. DIST. W/O SOUR.SE

Related models

0880001-01

104X905BA603

12A0-0103-A3

12HFA51A42H

12HGA11J52

269 PLUS-D/O-100P-125V

369-A200

369B1860G0026

369B1860G0030

369-C100

369-C101

369-HI-0-0-0-0

369-HI-0-M-F-E-0

369-HI-R-M-0-0-0-E

369-HI-R-M-0-E-0

369-HI-R-M-0-P-0-E

application area

Industries such as petroleum, coal, metal ore, nonmetal ore and wood;

Industries of basic materials, power and fuel.

Metal smelting and processing, coking and coke, chemistry, chemical raw materials, cement, wood-based panels and power, petroleum and coal processing industries;

Machinery and equipment manufacturing industry, metal structure, cement products, chemical fertilizer and pesticide industry.

Wind power generation, thermal power generation, hydropower generation, nuclear power generation and other energy sources; For example, thermal power in China is mainly distributed in the northern coal-producing areas of China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

About Xiamen kongjiang automation technology co., ltd:

Xiamen kongjiang automation technology co., ltd is a technology-based entity company established on may 11th, 2017, located in Xiamen, Fujian province. The company is mainly engaged in the sales of imported industrial control parts, electrical engineering design, installation, programming, debugging, construction and other businesses. The company has an experienced and well-trained technical team, which is committed to providing customers with services such as electrical automation system development, automatic upgrading and transformation of the original production line, energy-