IS2020LVPSG2A Manufacturer General Electric Company produces Mark VI/VIe function module

Part number IS2020LVPSG2A Manufacturer General Electric Company produces Mark VI/VIe function module according to the manufacturing policy series of General Electric Company. 

Spot supply situation 2020LVPSG2A is a power board developed by General Electric Company. It is a part of Mark VI control system. 

The power supply is equipped with a user control device, namely the power switch, and three status LED indicators. The power switch located on the front panel allows the user to control the output voltage of the power supply. In addition, it acts as a fault reset mechanism when switching. 

The LED indicators are divided into yellow, red and green, which provide information about the input power status, fault existence and normal operation respectively. 

Characteristic input voltage: The power supply operates with a direct current (DC) input voltage of 24 volts. Rated output power: it provides a total power output of 400 watts to ensure the power supply of various components in the system. +28V PSA output (quantity: 5): The power supply has 5 outputs and provides a stable voltage of +28V DC. These outputs are designed to supply power to specific parts or modules in the system to ensure reliable and consistent power distribution. +28V remote output (quantity: 1): In addition to PSA output, there is also a remote output that provides the regulation voltage of +28V DC. This output can be used to supply power to external devices or components, thus providing flexibility for system configuration and expansion. PS335 output: The power supply does not include the output with rated voltage of 335V DC. Status ID output: The power supply is equipped with status identification (ID) output, which provides feedback or signals about the running status of the equipment. 

This function enhances the monitoring ability and is convenient for timely maintenance or troubleshooting. Support for redundant operation: The power supply supports redundant operation, which means that it can seamlessly switch to the standby power supply in case of failure. This ensures the continuity of power supply and minimizes downtime, which is very important for systems that require high reliability and availability. 

Installation: Fix the power supply on the right side of the VME rack with a metal bracket. Connection points: the power supply has various connection points: DC input and output: these are located at the bottom of the power supply, including 28 volt DC input and 28 volt DC and 335 volt DC output. Status connector: In the new design, there is a status connector at the bottom to provide additional monitoring function. PSA and PSB connectors: These connectors are located at the top of the assembly and connected to the cable harness responsible for supplying power to the VME rack. 

Power distribution: The power supply consists of five 28 V DC power supply modules, each of which is dedicated to supplying power to a specific part of the VME rack, and is respectively marked as Part A, B, C, D, E and F.. Peripheral Power Options: The P28C output (also called PS28) is located at the bottom of the power supply and can be used to supply power to external peripherals. To enable this feature, the jumper plug located on the left side of the rack must be relocated from the default "Normal" setting to the "Isolated" position below. 

Fan configuration: The fans in the system can only run when the controller is installed in the rack. It receives power from the top connector on the rack on the left side of the rack. This ensures effective cooling and system performance, especially during operational use. Power supply/sign VI/NO-335V

Related models

0880001-01

104X905BA603

12A0-0103-A3

12HFA51A42H

12HGA11J52

269 PLUS-D/O-100P-125V

369-A200

369B1860G0026

369B1860G0030

369-C100

369-C101

369-HI-0-0-0-0

369-HI-0-M-F-E-0

369-HI-R-M-0-0-0-E

369-HI-R-M-0-E-0

369-HI-R-M-0-P-0-E

application area

Industries such as petroleum, coal, metal ore, nonmetal ore and wood;

Industries of basic materials, power and fuel.

Metal smelting and processing, coking and coke, chemistry, chemical raw materials, cement, wood-based panels and power, petroleum and coal processing industries;

Machinery and equipment manufacturing industry, metal structure, cement products, chemical fertilizer and pesticide industry.

Wind power generation, thermal power generation, hydropower generation, nuclear power generation and other energy sources; For example, thermal power in China is mainly distributed in the northern coal-producing areas of China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

About Xiamen kongjiang automation technology co., ltd:

Xiamen kongjiang automation technology co., ltd is a technology-based entity company established on may 11th, 2017, located in Xiamen, Fujian province. The company is mainly engaged in the sales of imported industrial control parts, electrical engineering design, installation, programming, debugging, construction and other businesses. The company has an experienced and well-trained technical team, which is committed to providing customers with services such as electrical automation system development, automatic upgrading and transformation of the original production line, energy-