ABB Rectangular load cells PFVL141V

Rectangular load cells PFVL141V

Nominal load (MN):

0.63. 0.80. 1.0. 1.25. 1.6. 2.0. 2.5. 3.1. 4.0. 5.0. 6.3. 8.0. 10. 12.5. 14. 16. 18. 20. 22. 25. 28. 31. 35. 40. 45. 50. 56

PFVL141x     QGPR104/102

Accuracy class (% of Fnom)    ± 0.5     ± 1.0

Linearity deviation (% of Fnom)    ≤± 0.5     ≤± 1.0

Hysteresis (% of Fnom)    ≤ 0.2     ≤ 0.2

Repeatability error (% of Fnom)    ≤ ± 0.1     ≤ ± 0.05

Compression (mm at Fnom)    0.05     0.05

Calibration error (% of Fnom)    0.1     0.1

Compensation for min. error    +20 - +80°C     +20 - +80°C

- Zero point drift    ≤ ± 0.01%/°C     ≤ ± 0.005%/°C

- Sensitivity drift    ≤ ± 0.01%/°C     ≤ ± 0.01%/°C

Working temperature range    -10 - +90°C     -10 - +80°C

Max. permitted short-term temp.    +110°C     +110°C

Storage temperature range    -40 - +90°C     -40 - +90°C

Application

ABB has many years of experience of installing load cells in all types of rolling mills. To achieve the best possible measurement results, certain basic rules must be observed during the installation of the load cell:

The entire force must pass through the load cell.

The force must be measured as close to the source of the force (the roll gap) as possible.

The load cells must be protected to the greatest possible extent from large bending, lateral and torsional forces.

Under the mill screw

For installation under the mill screw, the load cell can be combined with thrust bearings and pressure plates into a package attached to the mill screw.

This arrangement results in good force distribution, simple, inexpensive installation and easy servicing. In addition, there is no need to machine any surfaces on the roll stand. However, this arrangement does take up space in the roll window .

Under the lower back-up roll bearing

There must be a sufficiently large flat surface on the lower part of the roll stand to allow the installation of the load cell under the lower back-up roll bearing.

This arrangement has the advantage that there is no need to pay particular attention to the load cell during roll change.
 See also our offer regarding Load Cell Packages to the right .