TEY370 GE Molded Case Circuit Breaker

TEY370 GE Molded Case Circuit Breaker

Product Description P/N: TEY370 DESCRIPTION / SPECIFICATIONS Description The TEY370 is a three-pole, three-phase molded case circuit breaker from General Electric's Q-Line. It is rated for 70A at voltages of 277/480V and has a standard interrupting capacity of 14kA at 480V. This thermal magnetic circuit breaker operates at temperatures up to 40 degrees Celsius and features a bolt-on mounting configuration. Ideal for various industrial applications, it provides reliable overcurrent protection within electrical distribution systems. Technical Specifications Part Number TEY370 Manufacturer General Electric Family Q-Line Pole 3 Amp 70 Volt 480 Phase 3 Category Molded Case / 3-Pole Connection Bolt-On Type TEY Functions LI - Long-Time and Instantaneous Protection Thermal Magnetic AIC Ratings 14kA@480V Information About TEY370 The TEY370 molded case circuit breaker from General Electric's Q-Line series is designed for industrial applications requiring reliable electrical protection. Classified as Type TEY, this circuit breaker is configured with 3 poles (3P) and is suitable for use in three-phase (3PH) systems. It features an ampere rating of 70A, operating at voltages of 277/480V. The breaker is engineered to handle up to 14,000 amps of interrupting capacity (14kA) at 480 volts, ensuring robust protection against short circuits and overloads. Constructed with thermal magnetic technology, the TEY370 circuit breaker combines the thermal protection against overloads with magnetic protection for short circuits.

Inventory-related model

IS230TNPAH2A

F650BABF2G0LOSHE

IS220PAICH1A

DS215TCQAG1BZZ01A

IS215UCVEH2AE

IS200SDIIH1ADB MRP683026

IS200TREGH1BDB

IS220PDOAH1B

IS220PAICH1A

IC697CPM925

IS200TREAH2AED

UR6DH

HR911103A   VMIVME-7750的RJ45

Installing the Bus Controller The FIP Bus Controller should be installed in the main CPU rack. Always insert modules carefully to avoid damaging components. 1. Be sure the rack is powered-down. Caution Do not insert a module when power is applied to the rack.  This could cause the system to stop. 2. Position the Bus Controller at its intended location, with its component side to your right, away from the power supply.  The LEDs are at the top of the module's front edge. 3. Grasp the module firmly and insert it into the card guide. 4. Align the module's printed circuit board with the connector on the rack backplane and slide it towards the connector until it has started to seat. 5. Important - Place hands as shown with thumbs on the extreme left side of module. Push the board into the connector until the top and bottom latches click onto the rack rails. Visually inspect the board to be sure it has seated properly.