SHINKAWA VM-25S01 CONDITION MONITORING SYSTEM

VM-25 DEVICE CONFIG

(Configuration software for VM-25 condition

monitoring system)      Page 1 of 1

VM-25

MONITORING SYSTEM

Setup*1

*1 A PC is required. Setup option includes initial setup of the PC, installation of the software and PC address setting.

SYSTEM REQUIREMENTS

HARDWARE REQUIREMENTS

PC/AT compatible personal computer

Processor 1GHz or higher recommended

Memory 1GByte or higher recommended

Display 1280 x 768 or higher –resolution is recommended

Hard disk drive 1GByte of available hard-disk space

Drive DVD-ROM drive

Network Ethernet 100BASE-TX

SOFTWARE REQUIREMENTS

Category Model Edition Version

OS Microsoft® Windows® 7 (32/64bit) Professional

or higher

Any

Microsoft® Windows® 8.1(32/64bit) Pro or higher Any

Microsoft® Windows® 10 (32/64bit) Pro or higher Any

Others Microsoft® .NET Framework  - 4.0

CONNECTION

Supported devices : VM-25 Monitor

Number of simultaneous connections : 1device*3

*3 Connected device can be changed by altering the IP address, if the connection is made

via Ethernet.

COMMUNICATION(Ethernet)

Network : Ethernet 100Base-TX

Protocol : TCP/IP

SCREEN

Screen display language : English

DEVICE CONFIGURATION MANAGEMENT

Configuration change : Change monitor type (displacement vibration,

velocity vibration or acceleration

vibraton)

Paramter change : Parameter setting of vibration measurement

(Measurement, Alarm), Recorder output, Relay,

Parameter setting such as communication

Adjustment : Gap/Bias voltage value, measurement value, etc

Others : Channel disablement,

Time setting, Simulated value setting,

Modbus communication setting

(Data copy setting, scaling setting)

DISPLAY FUNCTION

MEASUREMENT VALUES

Gap/Bias Voltage Indications, Digital indication of measurement values,

Peak measurement values

ALARM STATUS

DANGER alarm, ALERT alarm, OK alarm

OTHER DISPLAY

Time etc.

CONTROL FUNCTIONS

ALARM CONTROL : Alarm reset, Peak-hold reset

BYPASS CONTROL : DANGER bypass, Channel bypass

LED CONTROL : All LEDs on/off

OTHER FUNCTIONS

Password protection : Password authentication on start-up, write

configuration to the device and adjust the device.

Firmware update : Update a firmware of VM-25.

Device setting file output : Output a configuration of VM-25 setting as text file

SOFTWARE DISTRIBUTION MEDIA

Media : DVD-ROM

SYSTEM CONFIGURATION

Example of Screen

※Actual screens may differ from the images shown in this document