ABB 3HAC5497-1

ABB 3HAC5497-1

Important 

All control parameters are determined in an optimum way for most actuators during Autoadjust. 

Changes should only be made when Autoadjust cannot be executed or control stability cannot be achieved. 

The KP value is the gain of the controller. The control speed and stability are influenced by the KP value. With higher KP values, the controlling speed increases. 

Important 

The control precision is not affected by the KP value. 

To compensate for existing dissymmetries in the controlled system, the KP value should be set separately for both directions (up / down). 

For most actuators, a satisfactory control response is achieved with a KP value in the 2.0 ... 10.0 range. 

You can use parameter KP UP to adjust the KP value for the positioning direction up (towards 100 %).

3BSE089152R0059

Expand from 20,000 to 30,000 OPC Points

3BSE089152R0061

Add AE License, OPC Server MOD 300 1.4

3BSE091972R1

CS513AK02 eDCN RJ-45 Comm Interface

3BUA001033R100

OCS Evolution Library for AC800M Demo Li

3BUC910018R1

RX506 Bracket, T-Box Mounting

3BUC910033R1

Plate,AC Main mounting

3BUC950052R15

TK830V115 RJ45 FTP CAT6 patch red 15m

3BUC950052R3

TK830V030 RJ45 FTP CAT6 patch red 3m

3BUC950053R15

TK831V115 RJ45 FTP CAT6 patch green 15m

3BUC950053R3

TK831V030 RJ45 FTP CAT6 patch green 3m

3BUC980002R1

CI560 TRIO Interface Submodule, MOD 300