ABB 3HAC5518-1
Important
All control parameters are determined in an optimum way for most actuators during Autoadjust. Changes should only be made when Autoadjust cannot be executed or control stability cannot be achieved.
The TV value is the derivative time of the controller.
Speed and stability are affected by the TV value in such a way that it counteracts dynamically to the KP value. The speed of the control action decreases for an increasing TV value.
To compensate for existing dissymmetries in the controlled system, the TV value should be set separately for both directions (up/down).
You can use parameter TV UP to adjust the TV value for the positioning direction up (towards 100 %).
3BSE074602R094
Add Eng. Displays 3.7 Basic Dis/TCL/TLL
3BSE074602R095
Add Eng. Displays 3.7 TCL Displays
3BSE074602R096
Add Eng. Displays 3.7 TLL Displays
3BSE074602R101
Add MOD 300 Eng Displays 3.7 Clients
3BSE078272R1
Advant StepUp Order
3BSE089143R0051
OPC Data Link 2.2 Functional License
3BSE089143R0052
OPC Data Link 2.2 Redundancy
3BSE089143R0333
OPC Data Link 2.2 ABB Internal Use Lic.
3BSE089151R0051
100 Points, OPC Server, MOD 300 1.4
3BSE089151R0052
250 Points, OPC Server, MOD 300 1.4
3BSE089151R0053
500 Points, OPC Server, MOD 300 1.4
3BSE089151R0054
1,000 Points, OPC Server, MOD 300 1.4
3BSE089151R0055
2,500 Points, OPC Server, MOD 300 1.4
Add: Building F05, High-tech Software Park, Xiamen City, Fujian Province
Tel: 0592-5211302
Mobile: 17750019513 (WhatsApp)
Email: yy4291644@gmail.com
ivy@kongjiangauto.com
Website: https://www.abb-sis.com