8937-HN Honeywell Fiber Optic Extender Module

8937-HN Honeywell Fiber Optic Extender Module 

Manufacturer: HoneywellPart number: 8937-HNHN module: optical fiber expander moduleThe 8 I/O series is connected to the S8 C300 through a pair of combined cable interfaces.Two redundant combined cable interfaces provide an IO link between the S8 C300 controller and related S8 I/O modules.The combination cable interface connector is located on the IOTA.Each combination cable can be configured to support 8 I/O series.The expander module of optical fiber option supports the use of S8 C300 to extend the I/O link outside the 8-series cabinet, thus realizing the remote application of 8-series I/O..

Regarding the specifications of the 8937-HN Honeywell optical fiber expander module, the following are some key information:Product overviewModule function: 8937-HN is an optical fiber expander module produced by Honeywell, which is used to extend the I/O link outside the 8-series cabinet of S8 C300 and realize remote I/O application 1.Compatibility: The module is connected to S8 C300 through a pair of combined cable interfaces, and supports 8 series I/O1.technical parameterInterfaces and connections: There are two redundant combined cable interfaces to provide IO links. The interface connector is located on IOTA 1.Extended distance: The optical fiber option extender module supports extending the signal to 2km1.Installation and connectionInstallation position: it should be placed in a relatively stable position to avoid signal loss caused by instability 2.Attention to connection: Pay attention to the direction of the connection port and the bundling mode of optical fiber when connecting, so as to ensure the cleanliness and neatness of the equipment and ensure the stability and transmission performance of signals.