DCS602-0520-51/15 ABB Permanent drive

Environmental Conditions The technical data contain the technical specifications of the drive, e.g. the ratings, sizes and technical requirements, provisions for fulfilling the requirements for CE and other markings and warranty policy. 

 System connection Voltage, 3-phase: Voltage deviation: Rated frequency: Static frequency deviation: Dynamic: frequency range: df/dt: Note: 230 to 525 V acc. to IEC 60038 ±10 % continuous; ±15 % short time (0.5 to 30 cycles) 50 Hz or 60 Hz 50 Hz ±2 %; 60 Hz ±2 % 50 Hz: ±5 Hz; 60 Hz: ± 5 Hz 17 % / s Special consideration must be taken for voltage deviation in regenerative mode. Degree of protection Converter modules and options (line chokes, fuses, field exciters, etc.): Paint finish Converter modules: IP 00 / NEMA TYPE OPEN Dark grey RAL 7012 Effect of the site elevation above sea level on the converter’s load capacity: Environmental limit values Permissible cooling air temperature 

 − with rated DC current (forced ventilation): 

 − with different DC current see figure below: 

 − for options: Relative humidity (at 5...+40°C): Relative humidity (at 0...+5°C): Change of the ambient temp. 0 to +40°C +30 to +55°C 0 to +40°C 5 to 95 %, no condensation -40 to +55°C-40 to +70°C 2 5 to 50 %, no condensation < 0.5°C / minute Storage temperature: Transport temperature: Pollution degree (IEC 60664-1, IEC 60439-1): Vibration class: Site elevation 3M3 >1000 m above mean sea level: with current reduction, see figure <1000 m above mean sea level: 100%, without current reduction below Effect of the ambient temperature on the converter module load capacity: