General Electric Mark VI series IS220PDIAH1A Discrete I/O packet data

General Electric Mark VI  series IS220PDIAH1A Discrete I/O packet

IS220PDIAH1A technical specification

Ambient temperature range: -30 to 65 degrees Celsius

Contact wetting output: 32 VDC

Function abbreviation/abbreviation: PDIA

Function description: discrete I/O package

Minimum voltage: 27.4V DC

Part number: 220PDIAH1A

Product series: logo VI

IS220PDIAH1A discrete input package protects the circuit through conformal PCB coating, which is applied to the entire basic circuit board of Mark VI series PCB in I/O package.

The IS220PDIAH1A discrete input module printed circuit board modular assembly module provided by General Electric Company was originally designed and manufactured specifically for inserting the automatic drive module of Mark VI steam turbine control system series, which was pointed out in the product introduction paragraph above. This is the greater Mark VI series of IS220PDIAH1A discrete input package equipment, and it is a major upgrade to the previous industry standard Mark V turbine control system series with similar full expansion series names, because the Mark VI series adds a possible environment for wind turbine functions based on gas and steam turbines provided by the early Mark V series products. Generally speaking, the Mark VI series of IS220PDIAH1A discrete input module printed circuit board modular module is also highly respected in its larger promotion industrial market, because it is one of the last released GE Mark product series using patented technology of Speedtronic control system.

Hardware tips and specifications

IS220PDIAH1A model is marked as discrete I/O package, which is used in Mark VI series together with YDIA discrete input module. In fact, the IS220PDIAH1A discrete input package equipment is not regarded as the original development equipment for its specific GE Mark VI series function product role, because it will be regarded as the only A-level function product version in which the IS220PDIAH1 parent discrete input package does not use the IS220PDIAH1A discrete input package equipment. Several different related terminal boards can be used for PDIA models, and all these terminal boards should be provided in a new, repaired or modified state on our AX control website, including:

IS200TBCIH4C

IS200STCIH1A

IS200STCIH8A

IS200TBCIH2C

IS200TCIH2A

These models are used in conjunction with PDIA and are approved for use in dangerous places. When used in dangerous environment, special certification is required. ULE207685 is certified for non-hazardous Class I Division 2 IIC and Class I Division 2 Division A, B, C and D locations. When it is used in IIC Branch of Atex Zone 2 Group, it needs specific certification, and the certification is UL Demko 12 ATEX 1114875X. Compared with other models in the Mark VI series, the IS220PDIAH1A does not necessarily have a specific panel, because it is an I/O package. There are seven indicators on the front of the equipment, and there are three sets of power indicators and two link indicators on the right side of the package, one for ENet1 and the other for ENet2. Under these three indicators, there is an Ethernet port, which is used to connect the model to Ethernet to facilitate Ethernet communication. IS220PDIAH1A package has location standards, two of which are UL 600790 Ed. 5 and UL 60079-15. 3 for IIC I level 2 group. This information can be found in the Hazloc manual of GEH-6725 Mark VI control equipment, which is located under the manual tab.