IS420ESWAH2A Industrial Ethernet /IONet switch

IS420ESWAH2A Industrial Ethernet /IONet switch

About IS420ESWAH2A

IS420ESWAH2A industrial Ethernet /IONet switch was originally manufactured for the Mark VIeS turbine control system series of General Electric Company, as specified in the original printed instruction manual materials, and can be obtained through our convenient manual tab. The Mark VIeS turbine control system series, as you may have guessed, has the following characteristics based on its complete extended series name:

A set of specific application choices in the control and management system of General Electric Company-Compatibility;

wind

gas

And a steam turbine automatic drive assembly.

This is a great improvement on the previously developed Mark V series, because the Mark V series is only based on the possible applications of gas and steam turbines.

Being regarded as a member of, it is a more attractive prospect in the larger visual automation industry market.

It is considered to be one of the recently developed GE logo product series, with its patents and respected Speedtronic control system technology.

Hardware tips and specifications

IONet/ industrial Ethernet switch package IS420ESWAH2A is marked as an unmanaged industrial Ethernet switch. The model is designed to meet the specific requirements for keeping up with real-time industrial solutions. Some features required to meet the speed and functional requirements are as follows:

Redundant power input

Led indicating the following status:

speed

Duplex

activity

Links exist for each port.

100Base-FX multimode fiber port

All fiber ports will have LC type connections.

Considering the original GE manufacturing of IS420ESWAH2A device, it is classified as the functional product number of IS420ESWAH2A, which indirectly describes many hardware features, including the special modular components of IS420ESWAH2A device, the abbreviation of ESWA function, the coating style of conformal PCB, the second group of Mark VIeS series products, and its unique A-level functional product version.

IS420ESWAH2A installation tips and specifications

When installing the switch, you can use a variety of installation directions; Depending on the installation direction used, different clips are needed. For example:

If the IS420ESWAH2A switch is installed parallel to the guide rail on the long side of the switch body, the clamp required for installation is 259B2451BVP1.

Please note that this clip can be used for ESWA and ESWB switches.

When installing IS420ESWAH2A, there is no need for related basic accessories/components when installing the switch, and there are no replacement parts in the module.

After the switch is inserted, the estimated service life of RJ-45 connector should be 200 disassembly/insertion cycles.